bcm94360cs2 big sur bluetooth not working

[Feartech]

EFI zip
Thanks in advance

you need to do this:

The New Beginner's Guide to USB Port Configuration

Important Update: June 2023 From Big Sur 11.3 on the built-in OpenCore XhciPortLimit quirk no-longer worked as described. This became a known "bug", though in reality it was Apple changing their internal code, making a simple "peek and poke" to keep it operating, a difficult task. However, with...

www.tonymacx86.com

 

[lobmarib]

I can't even boot the big sur installer...

 

[Feartech]

I can't even boot the big sur installer...

use your working EFI from before

 

[lobmarib]

Hi @Feartech
I've done what you suggested (used old EFI to install big sur 11.2 in order to do the usb mapping) but the usb controller is not being displayed in any of the usb ports (in hackintool)
So, how I'll know which port I should map as internal for it?
Thanks in advance

 

[Feartech]

Hi @Feartech
I've done what you suggested (used old EFI to install big sur 11.2 in order to do the usb mapping) but the usb controller is not being displayed in any of the usb ports (in hackintool)
So, how I'll know which port I should map as internal for it?
Thanks in advance

You should use Catalina to do port mapping

 

[lobmarib]

Same exact thing... No bluetooth connected to any port

 

[Feartech]

Same exact thing... No bluetooth connected to any port

assume it works ok in windows or linux?

you didn't accidently knock out the usb from the card to motherboard?

 

[lobmarib]

assume it works ok in windows or linux?

you didn't accidently knock out the usb from the card to motherboard?

Never tried on other OS.

The board should be well connected as the wifi works fine. The module is connected to the board using the e-2 (m-2) connector with an adapter.
It was working fine till I change the cpu fan (very close to the wifi/bluetooth board)... no sw changes

 

[lobmarib]

The board

 

[Feartech]

Never tried on other OS.

The board should be well connected as the wifi works fine. The module is connected to the board using the e-2 (m-2) connector with an adapter.
It was working fine till I change the cpu fan (very close to the wifi/bluetooth board)... no sw changes

best to check with another OS then you can be certain whether it is a hardware or software issue