- Joined
- Nov 25, 2017
- Messages
- 61
- Motherboard
- Toshiba Tecra Z50-C
- CPU
- i7-6600U
- Graphics
- HD 520
- Mobile Phone
So I've been working with RehabMan, he's been helping me get this thing up and running properly. Things have been working well minus a bluetooth issue, but there's a workaround.
Anyway, so I've been using the laptop but haven't made any changes to the DSDT and SSDT's once they were 'done'. Randomly, one reboot, the battery stopped responding and shows the battery at 100% but with the x through it. Oddly enough, another minor issue I noticed was that when I adjust the mouse sensitivity, it doesn't change. When I took out the SSDT's, the backlight brightness was broken again, but then the mouse speed worked properly. I don't really care about that as much.
I DID notice this which was new during verbose setup:
ACPI: Executed 23 blocks of module-level executable AML code
ACPI: sleep states S3 S4 S5
ACPI Error: Method parse/execution failed [\_SB_.VALZ._STA] (Mode ffffff002z329e10). AE_AML_INFINITE_LOOP (20140828/psparse-270)
ACPI Error: Method parse/execution failed [\_SB_.VALZ._STA] (Mode ffffff002z329e10). AE_AML_INFINITE_LOOP (20140828/psparse-270)
ACPI Error: Method execution failed [\_SB_.VALZ._STA] (Mode ffffff002z329e10). AE_AML_INFINITE_LOOP (20140828/uteval-b9)
The boot up is slightly slower now (I'm imaging it's because of what's above) but it's not substantial.
So, I thought I MUST have changed something... So I did a time machine restore to earlier today where things were working properly but it remains broken. The only thing I can think of is something's up with my SSDT's or DSDT since it exists outside of the file system (EFI, etc.)
Anyway. I'm lost. As far as I know, nothing at all has changed but obviously I've implemented something incorrectly somewhere despite it working and then not working suddenly.
Anyone with insight - I would appreciate the help.
Anyway, so I've been using the laptop but haven't made any changes to the DSDT and SSDT's once they were 'done'. Randomly, one reboot, the battery stopped responding and shows the battery at 100% but with the x through it. Oddly enough, another minor issue I noticed was that when I adjust the mouse sensitivity, it doesn't change. When I took out the SSDT's, the backlight brightness was broken again, but then the mouse speed worked properly. I don't really care about that as much.
I DID notice this which was new during verbose setup:
ACPI: Executed 23 blocks of module-level executable AML code
ACPI: sleep states S3 S4 S5
ACPI Error: Method parse/execution failed [\_SB_.VALZ._STA] (Mode ffffff002z329e10). AE_AML_INFINITE_LOOP (20140828/psparse-270)
ACPI Error: Method parse/execution failed [\_SB_.VALZ._STA] (Mode ffffff002z329e10). AE_AML_INFINITE_LOOP (20140828/psparse-270)
ACPI Error: Method execution failed [\_SB_.VALZ._STA] (Mode ffffff002z329e10). AE_AML_INFINITE_LOOP (20140828/uteval-b9)
The boot up is slightly slower now (I'm imaging it's because of what's above) but it's not substantial.
So, I thought I MUST have changed something... So I did a time machine restore to earlier today where things were working properly but it remains broken. The only thing I can think of is something's up with my SSDT's or DSDT since it exists outside of the file system (EFI, etc.)
Anyway. I'm lost. As far as I know, nothing at all has changed but obviously I've implemented something incorrectly somewhere despite it working and then not working suddenly.
Anyone with insight - I would appreciate the help.