Not valid, native:
Code:
Aji (4) @ 0x1cc3f0
DP, DP, DDVI, HDMI
00040000040300000001010112040501
00040000040300000001020122050402
04000000140200000001030000000306
00080000040200000001040011020104
edited a DP connector (0004), made senseid 04 on two connectors, not valid
HDMI connector (0008) is already sense-id 04, not clear why HDMI audio is not working
If you have a DP2HDMI adapter, try it.
Reminder, use Aji only if HDMI video is stable.
What HDMI device is connected?
Hello Toleda,
I do not have a DP2HDMI, my setup is the following:
Sapphire R9 280x -> HDMI -> Yamaha Receiver RV-375
Sapphire R9 280x -> DP -> Monitor Dell P2314H
Mavericks and Yosemite -> HDMI audio was working, probably HDAenabler was used, but I did not install anything special.
About the FBs, I was not able to get HDMI video with a native Frambuffer, the only 2 that worked were Aji and Hamachi, with patching the HDMI through Clover -> kextandkernel patches - but now when I read your reply it seems I messed it up.
Hamachi output I have from ati-personalities:
Personality: Hamachi
ConnectorInfo count in decimal: 4
Disk offset in decimal 1885712
0000000 00 04 00 00 04 03 00 00 00 01 01 01 12 04 05 01
0000010 00 04 00 00 04 03 00 00 00 01 02 01 22 05 04 02
0000020 04 00 00 00 14 02 00 00 00 01 03 00 00 00 03 06
0000030 00 08 00 00 04 02 00 00 00 01 04 00 11 02 01 04
0000040
So I see that my Hamachi output is different from my output, strange, cause my AMDController.kext should be El Capitan native. I will try to HEX replace my hamachi code with the one you gave.
My HDMI output decoding:
Connector at index 1
Type [@offset 43608]: HDMI-A (11)
Encoder [@offset 43612]: INTERNAL_UNIPHY2 (0x21)
i2cid [@offset 43743]: 0x93, OSX senseid:0x4
HotPlugID: 1
Connector Object Id [12] which is [HDMI_TYPE_A]
encoder obj id [0x21] which is [INTERNAL_UNIPHY2 (osx txmit 0x22 [duallink 0x2] enc 0x5)] linkb: tr
So this is how I came up with building the HDMI code by using the mapping example by Fl0rian in the
Radeon Compatibility Guide - ATI/AMD Graphics Cards thread.
So I got
22 05 01
04
Will try now to replace my hamachi with the real native provided by you and let see what happens.
Update2:
Replaced:
00 04 00 00 04 03 00 00 00 01 01 01 12 04 05 01
00 04 00 00 04 03 00 00 00 01 02 01 22 05 04 02
04 00 00 00 14 02 00 00 00 01 03 00 00 00 03 06
00 08 00 00 04 02 00 00 00 01 04 00 11 02 01 04
with
00 04 00 00 04 03 00 00 00 01 01 01 12 04 05 01
00 04 00 00 04 03 00 00 00 01 02 01 22 05 04 02
04 00 00 00 14 02 00 00 00 01 03 00 00 00 03 06
00 08 00 00 04 02 00 00 00 01 04 00
22 02 01 04
Now I have super weird sound when booting, HDMI video is not OK, I got the HDMI input in the sound settings but STILL no sound. Will keep experimenting...
Update1: No the HDMI input are gone too, weird...
Update2: No matter what I do, the only way to get the HDMI video is the "crazy" non sense Hex replace 22050402 -> 22050104 - actually only the 04 (sense id) put`s the video back... I am not sure really what else could be, we have tried it all!
As my last resort I was trying to see if there is another bios update, but no, have the latest. I have a legacy/UEFI switch on the GPU, but I am using legacy MB, so I am not sure this will do any difference.