Contribute
Register

Ati mobility radeon 5470 hd 512mb qe /ci bot working on yosemite.

Status
Not open for further replies.
ironman2

ironman2

Joined
Dec 10, 2014
Messages
79
Motherboard
SONY VAIO VPCEA46FG
CPU
i5-480M
Graphics
HD 5470M
Mobile Phone
  1. iOS
I was getting full accelaration on ml, by replacing the display -717 file by injecting edid and setting framebuffer to hoolock.
But in yosemite this isnt working.
Can anyone take a look onto this !
 
Grettings !!!!!!
Clover or Chameleon/Chimera ???
I think is Chimera.
¿¿¿What is """display -717 file""""" and """"by injecting edid """""?????

Where do you get it work 10.7,, 10.8,,, 10.9 ??????
Please, can you explain how ????
 
Fixed my issue by using clover. And set vbios enable
 
ironman2 said:
Fixed my issue by using clover. And set vbios enable
Click to expand...

Hello ironman2;

I've got the same graphics than yours mobility radeon 5470 hd 512 mb, my laptop is sony vaio vpceb2m1e, i have almost everything working on el capitan , except graphics, (i have the stretched desktop) and sometimes audio and touchpad gestures. have you upgrade to el capitan with your system working?. Would you mind telling me how do you configure clover or whatever you did in yosemite to get graphics working properly. I would appreciate very much.

Thank you, best regards.
 
For those with ATI Radeon 5470, set ATIConfig to Eulemur and edit with ur senseid- use clover.
Works for El Capitan 10.11.3;)
 
I installed Yosemite with Unibeast/Chimera.
I solved Ethernet and audio issues.
My wifi has Bluetooth integrated and it is not supported ... but I can get Wi-Fi with my Android phone and HoRNDIS package.
I extracted DSDT and now I boot with DSDT.
I was able to migrate to clover too.
But my Ati Mobility Radeon HD 5470 512 Mb its not fully working.
Booting with Chimera I get :
VRAM (Total): 3 MB
Vendor: ATI (0x1002)
Device ID: 0x68e0
Revision ID: 0x0000
Displays:
Display:
Resolution: 1024 x 768
Pixel Depth: 32-Bit Color (ARGB8888)
1024x768 and 3Mb.
I put amd5000Controller.kext and amdRadeonx3000.kext in extensions folder and tried many different org.chameleon.boot.plist ( GraphicsEnabler yes, Eulemur, Galago, Hoolock, ... ) without success.
This is my org.chameleon.Boot.plist:
#############################
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>DSDT</key>
<string>/Extra/DSDT.aml</string>
<key>Boot Banner</key>
<string>No</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Instant Menu</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>kext-dev-mode=1 -no-zp</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>UseKernelCache</key>
<string>No</string>
</dict>
</plist>
#########################
I just edited DSDT, the other part was written by the Unibeast installer.

MIGRATE TO CLOVER:

Now booting with Clover not qe/ ci too. Only 1024x768 too.
Only one difference, System Report displays my graphics is ATI RADEON HD 5470 Series but only 3 Mb Vram .... I Tried Galago, Eulemur, Hoolock, fake id, inject aTi and always get 1024x768 .... If I tried VBios always I get black screen.

My system is BIOS but I added a GPT SDD Drive and my hacking-tosh-iba runs on GPT with EFI and Recovery HD partitions.
Can you help me please ?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top