Contribute
Register

ASUS Zenbook UX305 compatability

Status
Not open for further replies.
vizion said:
@rehabman

As promised the dsdt / ssdt files extracted with clover.
I have also enclosed a ioreg and the clover folder with it.
Click to expand...

I don't think I requested them. What is the issue?

Maybe you could check if this have something to do with not able to log in to iMessage/facetime and iCloud. I have tried the nullethernet.kext but because of the not functional DSDT / SSDT's not able to check that.
Click to expand...

You need working Ethernet at en0. You can use NullEthernet.kext if you have no supported built-in Ethernet device.
 
see post #629.

The extracted .dsl's compile clean after patching except ssdt-10. I can't figure out how to clean the last errors. I think that the errors are related to the brightness patches.
 
vizion said:
see post #629.

The extracted .dsl's compile clean after patching except ssdt-10. I can't figure out how to clean the last errors. I think that the errors are related to the brightness patches.
Click to expand...

Read post #630.

Also quoting the guide:
RehabMan said:
Let me state it quite simply (because this comes up a lot): If you are opening an AML file directly in MaciASL and clicking Compile, you are doing it WRONG. Let that soak into the gray matter between your ears for a minute.
Click to expand...
 
I know opening .aml files directly will give problems. Your explanation was clear in only working with the .dsl files. After patching the .dsl files and saving them as acpi .aml files, all went fine except for ssdt-10. The other .aml files aren't being used except for placing them in clover/acpi/patched. You mention in the dsdt / ssdt guide that the ssdt's need to be renamed (ssdt-1 ssdt-2 etc) for correct functionality.

Don't get me wrong. I'am stuck on this point with ssdt-10.dsl
 
vizion said:
I know opening .aml files directly will give problems. Your explanation was clear in only working with the .dsl files. After patching the .dsl files and saving them as acpi .aml files, all went fine except for ssdt-10. The other .aml files aren't being used except for placing them in clover/acpi/patched. You mention in the dsdt / ssdt guide that the ssdt's need to be renamed (ssdt-1 ssdt-2 etc) for correct functionality.

Don't get me wrong. I'am stuck on this point with ssdt-10.dsl
Click to expand...

I find no issue with SSDT-10.dsl.

If you disassemble your EFI/Clover/ACPI/origin properly (with refs.txt):
Code: 
iasl -da -dl -fe refs.txt DSDT.aml SSDT*.aml

Note: I chose to use EIF/Clover/ACPI/origin since the files in extract.zip are not native and do not disassemble cleanly.

Then open SSDT-10.dsl in MaciASL and move the Externals from refs.txt as described in the guide...

Result: SSDT-10.dsl compiles without errors and can be saved as SSDT-10.aml just fine.

Note: No renaming necessary with Clover. Please read the guide carefully.
 
alimmm78 said:
http://www.tonymacx86.com/laptop-compatibility/180344-asus-zenbook-ux305la-compatability-2.html

i need this topic
i cant see
can admin open this topic?
thanks

i have got ux305la (i5)
i want to install el captain
Click to expand...

It has been removed, probably due to violation of site rules: http://www.tonymacx86.com/faq.php

Follow the Clover guide linked from the FAQ.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

You might look in the guides forum also: http://www.tonymacx86.com/el-capitan-laptop-guides/
 
Was anybody able to get the install working on the UX305LA? I am able to boot into the installer but it is not recognizing my SSD. I'm guessing I messed up the patches to get the SATA working correctly, but I'm not sure where I made any errors. Any help would be appreciated!
 
I dont want to read the entire thread sorry.. But I also time it's a good time to sum up info.

1. Has anyone have been able to make the UX305CA wifi card work?
2. If not, can I install one onboard or do I need to get a USB dongle?

Cheers all!
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top