Asus X550CL Almost working (Need some help)

[Cclown98]

​

Specifications

Processor                           :Intel Core i3 3217U @ 1.80GHz
Graphics Processor(GPU)             :Intel HD 4000
                                     NVIDIA GeForce GT 710M

Chipset                             :Intel HM76 Express Chipset
Hard disk                           :223GB TOSHIBA-TL100 (SSD)    (WORKING/MAX SPEED)
RAM                                 :6GB DDR3 1600 MHz SDRAM
Wifi                                :Atheros AR9485 Wireless Network Adapter
LAN                                 :Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter
Audio                               :Realtek High Definition Audio ALC270
USB 3.0                             :Intel Panther Point PCH - USB 3.0 xHCI Controller
Touchpad                            :Elantech Touchpad v4 Hardware
Webcam                              :USB2.0 UVC HD WebCam / Logitech C920E
Card reader                         :Realtek RTS5289 PCI-E Card Reader

About Monitor:

Manufacturer............. Samsung
Plug and Play ID......... SEC324A
Data string.............. 156AT24-P01
Serial number............ n/a
Manufacture date......... 2011, ISO week 0
Filter driver............ None

Interface :
1 x Microphone-in jack/Headphone-out jack
1 x VGA port/Mini D-sub 15-pin for external monitor
2 x USB 3.0 port(s)
1 x RJ45 LAN Jack for LAN insert
1 x HDMI

I've been setting this laptop up with sierra 10.12.3 the results until now have been, it's installed along with Windows 10 in the same SSD (GPT-EFI) :

Graphics Processor: Intel HD 4000 Working, i can play video in 1080p with no problems, but I'm not able to access display option on preferences or change the brightness and the NVIDIA GT 710M card isn't working.

Wifi: Qualcomm Atheros AR9485 is fully working.

LAN: Realtek RTL8168/8111 is fully working.

Touchpad: it's working so well but I prefer using a wireless Logitech Bluetooth mouse.

Webcam: Both the Built-in and the Logitech C920 are fully working

Audio: Microphone, Speakers and Jack (Headphone out) are working very well.

HDMI Port: I haven't tested it yet

BUGS:
* Display Panel is not working.
* Keyboard Working with Fn option but I have to double press caps lock to active/disable capital letter (one press does nothing).


DSDT: I haven't configure anything here because I do not know anything about this.

I'll upload my clover from efi folder with the extracted DSDT (from pressing F4)

Any help from you would be very nice, thanks.

 

[RehabMan]

​

Specifications

Processor                           :Intel Core i3 3217U @ 1.80GHz
Graphics Processor(GPU)             :Intel HD 4000
                                     NVIDIA GeForce GT 710M

Chipset                             :Intel HM76 Express Chipset
Hard disk                           :223GB TOSHIBA-TL100 (SSD)    (WORKING/MAX SPEED)
RAM                                 :6GB DDR3 1600 MHz SDRAM
Wifi                                :Atheros AR9485 Wireless Network Adapter
LAN                                 :Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter
Audio                               :Realtek High Definition Audio ALC270
USB 3.0                             :Intel Panther Point PCH - USB 3.0 xHCI Controller
Touchpad                            :Elantech Touchpad v4 Hardware
Webcam                              :USB2.0 UVC HD WebCam / Logitech C920E
Card reader                         :Realtek RTS5289 PCI-E Card Reader

About Monitor:

Manufacturer............. Samsung
Plug and Play ID......... SEC324A
Data string.............. 156AT24-P01
Serial number............ n/a
Manufacture date......... 2011, ISO week 0
Filter driver............ None

Interface :
1 x Microphone-in jack/Headphone-out jack
1 x VGA port/Mini D-sub 15-pin for external monitor
2 x USB 3.0 port(s)
1 x RJ45 LAN Jack for LAN insert
1 x HDMI

I've been setting this laptop up with sierra 10.12.3 the results until now have been, it's installed along with Windows 10 in the same SSD (GPT-EFI) :

Graphics Processor: Intel HD 4000 Working, i can play video in 1080p with no problems, but I'm not able to access display option on preferences or change the brightness and the NVIDIA GT 710M card isn't working.

Wifi: Qualcomm Atheros AR9485 is fully working.

LAN: Realtek RTL8168/8111 is fully working.

Touchpad: it's working so well but I prefer using a wireless Logitech Bluetooth mouse.

Webcam: Both the Built-in and the Logitech C920 are fully working

Audio: Microphone, Speakers and Jack (Headphone out) are working very well.

HDMI Port: I haven't tested it yet

BUGS:
* Display Panel is not working.
* Keyboard Working with Fn option but I have to double press caps lock to active/disable capital letter (one press does nothing).


SSDT: I haven't configure anything here because I do not know anything about this.

I'll upload my clover from efi folder with the extracted SSDT (from pressing F4)

Any help from you would be very nice, thanks.

Suggestions:
- update to 10.12.5.
- read FAQ
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[Cclown98]

Suggestions:
- update to 10.12.5.
- read FAQ
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Thanks for the suggestions, I've got a problem I tried updating my hackintosh by using the combo update 10.12.5 and when it's done it continues being 10.12.3

 

[RehabMan]

Thanks for the suggestions, I've got a problem I tried updating my hackintosh by using the combo update 10.12.5 and when it's done it continues being 10.12.3

You can update with the App Store if your system is configured correctly...

Also...
Read FAQ, "Problem Reporting"
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[Cclown98]

You can update with the App Store if your system is configured correctly...

Also...
Read FAQ, "Problem Reporting"
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

BUGS:
* Display Panel is working but i don't have any option for brightness configuration
* Keyboard Working with Fn option but I have to double press caps lock to active/disable capital letter (one press does nothing).

 

[RehabMan]

BUGS:
* Display Panel is working but i don't have any option for brightness configuration
* Keyboard Working with Fn option but I have to double press caps lock to active/disable capital letter (one press does nothing).

No "Problem Reporting" files attached.

 

[Cclown98]

No "Problem Reporting" files attached.

which files should i upload ? sorry but i'm new on this

 

[RehabMan]

which files should i upload ? sorry but i'm new on this

All files requested in FAQ, "Problem Reporting".
Read it carefully. Attach all files/output.

 

[Cclown98]

All files requested in FAQ, "Problem Reporting".
Read it carefully. Attach all files/output.

Thank you so much, also i've got to say that after the update the headphone jack stopped working

 

[RehabMan]

Thank you so much, also i've got to say that after the update the headphone jack stopped working

You forgot ioreg.
Please read carefully.

But I can see right away why backlight is not working.
You have SSDT-PNLF.aml, but no GFX0->IGPU rename, no AppleBacklightInjector.kext installed, and no patch for AppleBacklight in your config.plist KextsToPatch.

Read guide:
https://www.tonymacx86.com/threads/...rol-using-applebacklightinjector-kext.218222/

Note: Your kextcache output shows quite a mess!