- Joined
- Jan 2, 2019
- Messages
- 5
- Motherboard
- ASUS STRIX X-299-E GAMING
- CPU
- I9-7940X
- Graphics
- Vega 64
- Mac
- Mobile Phone
Hey ho together,
i currently a little bit frustrated during my fresh mojave hack install.
Followed this guide step by step from @kgp : "iMac Pro X299 - Live the Future now with macOS 10.14 Mojave"
I´ve done all required bios settings, all changes to the conf.plist and created the bootable USB Stick.
Now i have probs with the famous USB power / USB driver problems.
My board is pretty similar to the x299 Deluxe used in the guide, but i dont now how to manage the problems right now.
DSDT Patching? I think it´s a post installation method via IOReg Browser, or not? I´m a beginner...
Hint:
When i boot with a sata ssd root device i will end up in the language selection screen of the installer. But no mouse, no keyboard -> No Chance :-D
I´ve tried a few things:
- different BIOS options e.g. "Keyboard and Mouse Simulator" or "Legacy USB Support"
- USB 2.0 Stick at USB 2.0 Port, USB 3.0 Stick at USB 3.0 Port, tried all ports!!
- SSDTs of @kgp ´s collection .. He posted SSDT-USBX.aml which is for power problems during boot. Same problem but maybe i did something
wrong in the implementation??
- different USBInjects.kext .. Maybe i did something wrong??
In germany you would say "Ich seh den Wald vor lauter Bäumen nicht mehr." which means:
I´ve tried too much things ... now i dont know where i am. :-D Please help!
Attached you can find my current EFI Folder, maybe a little bit trashy. I tried to much things..
Hardware:
ASUS Strix X299-E Gaming
Intel i9-7440X
Vega 64 OC
BIOS Settings
- first of all i´ve set all settings mentioned in the guide
- current Advanced\USB Configuration settings
- Legacy USB Support -> Enabled
- USB Mass Storage Driver Support -> Enabled
- USB Keyboard and Mouse Simulator -> Disabled
i currently a little bit frustrated during my fresh mojave hack install.
Followed this guide step by step from @kgp : "iMac Pro X299 - Live the Future now with macOS 10.14 Mojave"
I´ve done all required bios settings, all changes to the conf.plist and created the bootable USB Stick.
Now i have probs with the famous USB power / USB driver problems.
My board is pretty similar to the x299 Deluxe used in the guide, but i dont now how to manage the problems right now.
DSDT Patching? I think it´s a post installation method via IOReg Browser, or not? I´m a beginner...
Hint:
When i boot with a sata ssd root device i will end up in the language selection screen of the installer. But no mouse, no keyboard -> No Chance :-D
I´ve tried a few things:
- different BIOS options e.g. "Keyboard and Mouse Simulator" or "Legacy USB Support"
- USB 2.0 Stick at USB 2.0 Port, USB 3.0 Stick at USB 3.0 Port, tried all ports!!
- SSDTs of @kgp ´s collection .. He posted SSDT-USBX.aml which is for power problems during boot. Same problem but maybe i did something
wrong in the implementation??
- different USBInjects.kext .. Maybe i did something wrong??
In germany you would say "Ich seh den Wald vor lauter Bäumen nicht mehr." which means:
I´ve tried too much things ... now i dont know where i am. :-D Please help!
Attached you can find my current EFI Folder, maybe a little bit trashy. I tried to much things..
Hardware:
ASUS Strix X299-E Gaming
Intel i9-7440X
Vega 64 OC
BIOS Settings
- first of all i´ve set all settings mentioned in the guide
- current Advanced\USB Configuration settings
- Legacy USB Support -> Enabled
- USB Mass Storage Driver Support -> Enabled
- USB Keyboard and Mouse Simulator -> Disabled