ASUS STRIX Z270E with Intel i7 7700k Kaby Lake won't install

[BluMonsta]

MB: ASUS STRIX Z270E
CPU: Intel i7 7700k
HDD: 2TB Seagate Barracuda
SSD: Samsung 850 Evo
Main Drive: Samsung 960 Pro M.2
GPU: ASUS GeForce GTX 1070 8GB ROG STRIX OC Edition (Unplugged the power connecter and have monitor connected to onboard HDMI output)

I keep getting this error message when I use the -v command.

Any help would be appreciated. I have tried both OsxAptioFixDrv-64.efi and OsxAptioFix2Drv-64.efi when I use OsxAptioFix2Drv-64.efi I get the below message.
OsxAptioFixDrv: Starting overrides for System\Library\CoreServices\boot.efi Using reloc block: no, hibernate wake: no ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

When I use OsxAptioFixDrv-64.efi I get the attached image.

Any help would be appreciated.

EDIT: for clarification I am using UniBeast-7.1.1 and Clover_v2.4k_r4243.

 

[BreBo]

@BluMonsta, please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.

Profiles need to contain at least your primary system to assist others with helping you.

Add slide=0 kernel flag to the Boot Arguments in Clover's config.plist
Make sure that CsrActiveConfig is set to 0x67 not 0x03 in Clovers config.plist.

If that doesn't work, in addition to the above, try using OsxAptioFix2Drv-64.efi instead of OsxAptioFixDrv-64.efi.

 

[BluMonsta]

Add slide=0 kernel flag to the Boot Arguments in Clover's config.plist
Make sure that CsrActiveConfig is set to 0x67 not 0x03 in Clovers config.plist.

I have no idea how to alter the CsrActiveConfig or what that even means.

 

[BluMonsta]

@BluMonsta, please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.


Add slide=0 kernel flag to the Boot Arguments in Clover's config.plist
Make sure that CsrActiveConfig is set to 0x67 not 0x03 in Clovers config.plist.

If that doesn't work, in addition to the above, try using OsxAptioFix2Drv-64.efi instead of OsxAptioFixDrv-64.efi.

I have no idea how to alter the CsrActiveConfig or what that even means.

 

[BreBo]

I have no idea how to alter the CsrActiveConfig or what that even means.

Download Clover Configurator (Vibrant Edition)
Open Clover Configurator
Mount your EFI partition
Open EFI/EFI/Clover/Config.plist
Check the Boot section and select/enable slide=0
Check the RT Variables section and change CsrActiveConfig from 0x03 into 0x67
Save
Close Clover Configurator

 

[catchefling]

Did this end up working? Having a similar issue...

 

[BluMonsta]

Did this end up working? Having a similar issue...

Nope. Just cuz up on it.