Asus rampage v extreme - advice

[Akroma10]

If you have a stable machine with my configuration, thanks for sharing


- Rampage V extreme
- i7 5930K
- 4x4 Go DDR4 RAM 2133 MHz
- Gigabyte GTX 980 Gaming 4GD

+1

 

[Akroma10]

A question: Which ram are you using?
I'm using crucial ballistix sport ddr4 2400MHz.

Thx

 

[Akroma10]

16GB DDR4 @2666MHz

Which ram are you using? Corsair Venegeance LPX 4x4GB DDR4? C15 or C16?
Thanks

Regards

 

[dodo2nice]

Hey ! Update :

After many nights after work of testing different combinations using Uni/multibeast, I was not able to get my GPU recognized and use drivers.

Did a fresh install using Clover last night with help from this and other forums and success ! CPU Cores ok, GPU NVDIA drivers ok, USB3, Bluetooth, Wifi ok ! The post installation isn't all done, example I still boot using USB key and RAM recognized as DDR3 2133MHz… Don't know if DDR4 can be recognized at all, will see.

I will be editing video this weekend and see how it goes…


@ Akroma10 : Here is my config

ASUS RAMPAGE V EXTREME
i7 5930K 3,5GHz
Gigabyte GTX 980 Gaming 4GD
RipJaws 4 DDR4 2400MHz 4x4Go
Watercooling Kraken X61
Corsair Gold 1000W Power supply

​

 

[Akroma10]

Hey ! Update :

After many nights after work of testing different combinations using Uni/multibeast, I was not able to get my GPU recognized and use drivers.

Did a fresh install using Clover last night with help from this and other forums and success ! CPU Cores ok, GPU NVDIA drivers ok, USB3, Bluetooth, Wifi ok ! The post installation isn't all done, example I still boot using USB key and RAM recognized as DDR3 2133MHz… Don't know if DDR4 can be recognized at all, will see.

I will be editing video this weekend and see how it goes…


@ Akroma10 : Here is my config

ASUS RAMPAGE V EXTREME
i7 5930K 3,5GHz
Gigabyte GTX 980 Gaming 4GD
RipJaws 4 DDR4 2400MHz 4x4Go
Watercooling Kraken X61
Corsair Gold 1000W Power supply

​

Congratulations!!
Now i'ill wait for your video in order to understand every step!!
thank you
hi

 

[aznkorboi]

oh Lord....

I'm such a noobie when it comes to this stuff..

So, for sure, we cannot do this with a 5960x correct?

I have a Asus Rampage V Extreme as well but a 5960x processor.

 

[Akroma10]

Hey ! Update :

After many nights after work of testing different combinations using Uni/multibeast, I was not able to get my GPU recognized and use drivers.

Did a fresh install using Clover last night with help from this and other forums and success ! CPU Cores ok, GPU NVDIA drivers ok, USB3, Bluetooth, Wifi ok ! The post installation isn't all done, example I still boot using USB key and RAM recognized as DDR3 2133MHz… Don't know if DDR4 can be recognized at all, will see.

I will be editing video this weekend and see how it goes…

​

News?
Does your system recognize ddr4 ram? Does your system start from ssd?
Can you edit the video?
thanks
bye
thanks

 

[Akroma10]

It's me!!! Rampage V, i7 5930K, 2x GTX 980 EVGA, 16GB DDR4 @2666MHz, Asus PG278Q With displayport cable


Follow the instruction about TSCSync patch
View attachment 117898View attachment 117897

FIRST: BOOT With: -v npci=0x2000 cpus=1 nv_disable=1 kext-dev-mode=1
AFTER INSTALLING WEB NVDIA DRIVER remove nv_disable=1 and add nvda_drv=1
org.chameleon.Boot.plist:

<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>kext-dev-mode=1 nvda_drv=1 cpus=1 npci=0x2000</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Instant Menu</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>”2560x1440x32"</string>
<key>UseKernelCache</key>
<string>No</string>
<key>HDEFLayoutID</key>
<string>01000000</string>
<key>HDAEnabler</key>
<string>No</string>

Multibeast setup is:

DRIVERS
------------------------------------
Audio
ALC 1150 + Optional HDAEnabler: Audio ID: 1

Disk

3d Party SATA (with SSD also TRIM ENABLER trim patch)

Misc
EvOreboot, FakeSMC v6.11.xxxx, NullCPUPowerManagment, USB 3.0 - Universal, VoodooTSC based on your CPU cores

Network
Intel/AppleIntelE1000e v3.1.0
-------------------------------------
Bootloaders
Chimera
-------------------------------------
CUSTOMIZE
BootOption:
Basic Boot Options

System Definitions:
MacPro 6,1

By the images i see you are italian. Me too!
Can I ask you to explain in details all the steps?
I'm following different guide but it is not very simple to understain the proper way to install Yosemite.
Thanks
regards

p.s. My system: Rampage V extreme, i7-5930K, Gigabyte gtx 980 G1 gaming, 16GB crucial 2133MHz

 

[HamiltonSandwich]

Im building with focus on use for DAW. Audio functional?

Thanks for your help!

 

[Akroma10]

Hey ! Update :

After many nights after work of testing different combinations using Uni/multibeast, I was not able to get my GPU recognized and use drivers.

Did a fresh install using Clover last night with help from this and other forums and success ! CPU Cores ok, GPU NVDIA drivers ok, USB3, Bluetooth, Wifi ok ! The post installation isn't all done, example I still boot using USB key and RAM recognized as DDR3 2133MHz… Don't know if DDR4 can be recognized at all, will see.

I will be editing video this weekend and see how it goes…


@ Akroma10 : Here is my config

ASUS RAMPAGE V EXTREME
i7 5930K 3,5GHz
Gigabyte GTX 980 Gaming 4GD
RipJaws 4 DDR4 2400MHz 4x4Go
Watercooling Kraken X61
Corsair Gold 1000W Power supply

​

I have the same problems. The GPU is not recognized. I have to check if all the system is working fine, but this is an issue that i have to resolve.
Some suggestion? Which combination of drivers can I use?
Thx
regards


EDIT: GPU Recognized. Installation success!