- Joined
- Oct 21, 2011
- Messages
- 15
- Motherboard
- Gigabyte GA-Z87X-UD3H
- CPU
- i7 4770k @ 4.4GHz
- Graphics
- Geforce GTX650Ti
- Mac
- Classic Mac
- Mobile Phone
the steps i did , purchase Mountain Lion 10.8 from the App Store
UniBeast guide prepare USB Install drive nothing was remove my video card Gforce 520
- Enter the BIOS by hitting DEL and reset the BIOS to optimized defaults, change the Sata mode to AHCI disable realtek lan.
- Plug USB i hit F8 to bring up the boot options menu. Select USB device.
- install os x mountain lion successful , (my noobie mistake to test installs ML on 1.5 tb drive got boot0:GPT got boot0:test) did two partition.
- booted install os x mountain lion panic cpu 0 , download multibeast 4.6.1 i just install with my working lion change destination to new ML drive, check patched AppleInterCPUPower use OS X 10.7.4 Ivy Bridge success, GraphicsEnabler yes , sleep works, fake SMC , audio AppleHDA Rollback with non DSDT HDAENABLER using DSDT Asus P8Z68 pro, download kexts for my video card Gforce 520 . , then I just restore working ML to SSD load fast so far no panic after multibeast install and Chimera , all my previous apps works so happy VMware fusion works ML few app use with windows no need to reboot to my windows drive
[WORKING]
+ UEFI BIOS: . patched power management. No DSDT required. (using DSDT Asus P8Z68 pro)
+ Graphics: Intel HD2000 untested
+Gfroce 520 (perfect, no glitches/artefacts) with kexts
+ Networking: Realtek RTL8111E Gigabit Ethernet
+ Audio: Realtek ALC892
+ SATA3
+ USB3 (tentative)
+ Trim support for SSDs
+ Dual-monitor support (DVI & HDMI)
+patched Power Management (Sleep, restart and shutdown)
+ Single-click wake from sleep
+ No BIOS reset from sleep
+ App Store + iCloud
+ SATA Optical drives
one question Trim support for SSDs MUST?
UniBeast guide prepare USB Install drive nothing was remove my video card Gforce 520
- Enter the BIOS by hitting DEL and reset the BIOS to optimized defaults, change the Sata mode to AHCI disable realtek lan.
- Plug USB i hit F8 to bring up the boot options menu. Select USB device.
- install os x mountain lion successful , (my noobie mistake to test installs ML on 1.5 tb drive got boot0:GPT got boot0:test) did two partition.
- booted install os x mountain lion panic cpu 0 , download multibeast 4.6.1 i just install with my working lion change destination to new ML drive, check patched AppleInterCPUPower use OS X 10.7.4 Ivy Bridge success, GraphicsEnabler yes , sleep works, fake SMC , audio AppleHDA Rollback with non DSDT HDAENABLER using DSDT Asus P8Z68 pro, download kexts for my video card Gforce 520 . , then I just restore working ML to SSD load fast so far no panic after multibeast install and Chimera , all my previous apps works so happy VMware fusion works ML few app use with windows no need to reboot to my windows drive
[WORKING]
+ UEFI BIOS: . patched power management. No DSDT required. (using DSDT Asus P8Z68 pro)
+ Graphics: Intel HD2000 untested
+Gfroce 520 (perfect, no glitches/artefacts) with kexts
+ Networking: Realtek RTL8111E Gigabit Ethernet
+ Audio: Realtek ALC892
+ SATA3
+ USB3 (tentative)
+ Trim support for SSDs
+ Dual-monitor support (DVI & HDMI)
+patched Power Management (Sleep, restart and shutdown)
+ Single-click wake from sleep
+ No BIOS reset from sleep
+ App Store + iCloud
+ SATA Optical drives
one question Trim support for SSDs MUST?