- Joined
- Oct 18, 2012
- Messages
- 20
- Motherboard
- ASUS V8-P8H67E
- CPU
- i7 3770
- Graphics
- HD4000
- Mac
- Classic Mac
- Mobile Phone
[success] asus p8h67
Here are the steps to installing Yosemite on the ASUS P8H67 motherboard:
Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC892
Drivers > Disk > 3rd Party SATA
Drivers > Disk > TRIM Enabler > 10.10.0 TRIM Patch
Drivers > Misc > FakeSMC v6.11.1328
Drivers > Misc > NullCPUPowerManagement
Drivers > Network > Realtek > RealtekRTL8111 v1.2.2
Bootloaders > Chimera v4.0.0
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Kext Dev Mode
Customize > Boot Options > Use KernelCache
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > Themes > tonymacx86 Black
See also:
http://www.tonymacx86.com/yosemite-desktop-guides/146010-os-x-10-10-yosemite-asus-p8h67-m-pro.html
Here are the steps to installing Yosemite on the ASUS P8H67 motherboard:
- Install Yosemite on your hard drive by booting into the Yosemite installer using UniBeast (You’ll need to use the -x flag, i.e. safe mode)
- After installing, use Unibeast again to boot up the freshly installed Yosemite drive. You’ll need the following flags (dart=0, PCIRootUID=0 npci=0x200 GraphicsEnabler=NO)
- Run MultiBeast with the following configuration and restart:
Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC892
Drivers > Disk > 3rd Party SATA
Drivers > Disk > TRIM Enabler > 10.10.0 TRIM Patch
Drivers > Misc > FakeSMC v6.11.1328
Drivers > Misc > NullCPUPowerManagement
Drivers > Network > Realtek > RealtekRTL8111 v1.2.2
Bootloaders > Chimera v4.0.0
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Kext Dev Mode
Customize > Boot Options > Use KernelCache
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > Themes > tonymacx86 Black
- This time reboot into Yosemite directly from the hard disk (i.e. without Unibeast this time as the Chimera boot loader is now installed on the yosemite drive) with the following flags: dart=0 PCIRootUID=0 UseKernelCache=NO
- Once in Yosemite, run the following from a terminal session:
sudo kextcache -prelinked-kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache -K /System/Library/Kernels/kernel /System/Library/Extensions - Edit the Kernel flags in the file: /Extra/org.chameleon.Boot.plist to include kext-dev-mode=1 PCIRootUID=0 dart=0 and restart!
- Select Internal Speakers in the System Preferences->Sound settings of Yosemite to enable sound.
- That's it... Enjoy!.
See also:
http://www.tonymacx86.com/yosemite-desktop-guides/146010-os-x-10-10-yosemite-asus-p8h67-m-pro.html