ASUS N552vw 4K [macOS 10.14.5] Installation

[jarvisnt]

Hello
I have laptop asus brand
Details are in my profile

I'm stuck on something :
"Warning service exited with abnormal code 1"
I have make lots of clover [rehabman clovers, my friends clover who have same model laptop]
lots of kext tested
No luck
I had high sierra 10.13.4 and not updated to 10.13.6 then want to migrate to mojave wait for 10.14.5 near end of mojave line
I got help from moderators rehab and feartech for high sierra thanks to those now i need on for this i dont want to change my os to 10.15 just need mojave thanks

so
I attached last CLOVER FOLDER and Error picture
maybe something is wrong in clover and plists or not needed kext wrong patches anything
Display is 4K not full hd cause there is two model
mine is 12GB ram 2slot used 2slot free with 4K display
work prefectly with high sierra
Maybe mojave worked too
thanks
please help to get this done [need for college work have not enough money to buy macbook YET]
THANKS in advance

 

[Feartech]

Hello
I have laptop asus brand
Details are in my profile

I'm stuck on something :
"Warning service exited with abnormal code 1"
I have make lots of clover [rehabman clovers, my friends clover who have same model laptop]
lots of kext tested
No luck
I had high sierra 10.13.4 and not updated to 10.13.6 then want to migrate to mojave wait for 10.14.5 near end of mojave line
I got help from moderators rehab and feartech for high sierra thanks to those now i need on for this i dont want to change my os to 10.15 just need mojave thanks

so
I attached last CLOVER FOLDER and Error picture
maybe something is wrong in clover and plists or not needed kext wrong patches anything
Display is 4K not full hd cause there is two model
mine is 12GB ram 2slot used 2slot free with 4K display
work prefectly with high sierra
Maybe mojave worked too
thanks
please help to get this done [need for college work have not enough money to buy macbook YET]
THANKS in advance

update your clover to the latest version via sourceforge

 

[jarvisnt]

With customize option or simple ?

 

[Feartech]

With customize option or simple ?

always customise

 

[jarvisnt]

Ok, I update my clover
Put my kexts and clover putted efi drivers
I edited my config plist
booted
Get error of gIOLockscreenstate 3 and i edited ig-platform-id to 0x12345678 from 0x1916000 and booted ok to installer
Format my SSD to osx extended journal and install
Rebooted and choosed usb and boot again but ERROR
in verbose mode i attach a pic and my clover folder
What should I do now
Mojave installed but when i booted from USB to my ssd macbook data installed os stop at that error
Also i changed the ig plaftorm again not work
Basically should it not work with that ig plaform id ??
Its Intel HD 530 with nvidia 960m
leave nvidia alone for now
It sould work with intel hd530 with that id if i write the id correctly !!
AND
I think other configuration on config.plist might be wrong or need some more kext and efi driver I don't know need help

NOTE :
only config.plist load others are backup and not correct backup of config plist so the last one is config.plist
Thanks

 

[Feartech]

Ok, I update my clover
Put my kexts and clover putted efi drivers
I edited my config plist
booted
Get error of gIOLockscreenstate 3 and i edited ig-platform-id to 0x12345678 from 0x1916000 and booted ok to installer
Format my SSD to osx extended journal and install
Rebooted and choosed usb and boot again but ERROR
in verbose mode i attach a pic and my clover folder
What should I do now
Mojave installed but when i booted from USB to my ssd macbook data installed os stop at that error
Also i changed the ig plaftorm again not work
Basically should it not work with that ig plaform id ??
Its Intel HD 530 with nvidia 960m
leave nvidia alone for now
It sould work with intel hd530 with that id if i write the id correctly !!
AND
I think other configuration on config.plist might be wrong or need some more kext and efi driver I don't know need help

NOTE :
only config.plist load others are backup and not correct backup of config plist so the last one is config.plist
Thanks

0x19160000 is for a desktop

0x191b0000 is for laptops

also your config.plist is absolute rubbish, don't let clover configurator make one for you

 

[jarvisnt]

also your config.plist is absolute rubbish

Ok, so I edit id and test it
then i edit config if i can
can you help to fix this or anyone else fix that error
i came to final stat but kicked out some small mistakes

 

[Feartech]

Ok, so I edit id and test it
then i edit config if i can
can you help to fix this or anyone else fix that error
i came to final stat but kicked out some small mistakes

get fresh one from the guide, enable the options needed

make sure lilu and whatevergreen kexts are the latest
Use this to make sure your kexts are up to date:

profdrluigi / kextupdater / Downloads — Bitbucket

bitbucket.org

if you still have issues then upload new problem reporting files

 

[jarvisnt]

I updated all of kexts in other EFI
and boot
stuck in apfs_keybag_get:1331: failed to get apfs volume key bag, err = 2

whats next ?
thanks

 

[Feartech]

I updated all of kexts in other EFI
and boot
stuck in apfs_keybag_get:1331: failed to get apfs volume key bag, err = 2

whats next ?
thanks

if you still have issues then upload new problem reporting files