- Joined
- Aug 26, 2010
- Messages
- 95
- Motherboard
- ASRock H270 Pro4
- CPU
- i7-7700
- Graphics
- GTX 1060
- Mac
- Classic Mac
- Mobile Phone
Good evening...
This is a thread about the progress for instaling Catalina on my AsRock H270-Pro4 mobo with i7-7700 and a Sapphire RX 5700 XT card...
Current state:
- UniBeast 10 installer USB can't find any partitions to boot from (Clover 5102/5103)....it hangs forever with "scan entries"
- Installing Clover 4960 onto USB sticks recognizes partitions...but during installation screen turns dark and CPU goes into sleep mode
Now trying to install Mojave...where I had to install Clover 4960 as well onto the USB stick (Mojave also uses Clover 5102 which doesn't recognize any partitions and hangs forever!)
Currently Mojave install is running and booted the second time....and progress bar is at 100% and just stays there...
This is a thread about the progress for instaling Catalina on my AsRock H270-Pro4 mobo with i7-7700 and a Sapphire RX 5700 XT card...
Current state:
- UniBeast 10 installer USB can't find any partitions to boot from (Clover 5102/5103)....it hangs forever with "scan entries"
- Installing Clover 4960 onto USB sticks recognizes partitions...but during installation screen turns dark and CPU goes into sleep mode
Now trying to install Mojave...where I had to install Clover 4960 as well onto the USB stick (Mojave also uses Clover 5102 which doesn't recognize any partitions and hangs forever!)
Currently Mojave install is running and booted the second time....and progress bar is at 100% and just stays there...
Last edited: