Ask error problem

[encang-cutbray]

how to fix my hackintosh, I successfully install hackintosh but when I repaired the fan processor I have got the problem like this

 

[Gigamaxx]

how to fix my hackintosh, I successfully install hackintosh but when I repaired the fan processor I have got the problem like this

Go to bios and check the recommended settings. CFG lock disabled?
Look at the install guides for bios settings.

 

[encang-cutbray]

Go to bios and check the recommended settings. CFG lock disabled?
Look at the install guides for bios settings.

hai thank, but i dont know where is CFG lock in my bios, my motherbord is asus pb875-m

 

[Edhawk]

Check your bios has the following settings:

1. Virtualization : Enabled
2. VT-d : Disabled
3. XHCI Hand-Off : Enabled
4. Legacy USB Support: Auto/Enabled
5. IO SerialPort : Disabled
6. Network Stack : Disabled
7. XMP Profile : Auto / Profile 1/Enabled
8. UEFI Booting set to Enabled and set Priority over Legacy
9. Secure Boot : Disabled
10. Fast Boot : Disabled
11. OS Type: Other OS
12. Wake on LAN : Disabled

Dedicated Graphics + Integrated graphics card:

1. Integrated Graphics : Enabled
2. Graphics: PEG/PCIe Slot 1
3. Initial Display Output : PCIe 1 Slot
4. DVMT Pre-Allocated : 128M or higher

Your system may not have all these settings, some may have different names, some may be hidden within other settings, CSM and UEFI booting being the ones to spring to mind.

You will also need to make sure your Graphics options are set correctly, i.e. Intel graphics enabled, and PEG or External set as default, so your GTX650 is priority graphics option.

 

[Gigamaxx]

hai thank, but i dont know where is CFG lock in my bios, my motherbord is asus pb875-m

Sometimes in the CPU overclock section?

 

[encang-cutbray]

Check your bios has the following settings:

1. Virtualization : Enabled
2. VT-d : Disabled
3. XHCI Hand-Off : Enabled
4. Legacy USB Support: Auto/Enabled
5. IO SerialPort : Disabled
6. Network Stack : Disabled
7. XMP Profile : Auto / Profile 1/Enabled
8. UEFI Booting set to Enabled and set Priority over Legacy
9. Secure Boot : Disabled
10. Fast Boot : Disabled
11. OS Type: Other OS
12. Wake on LAN : Disabled

Dedicated Graphics + Integrated graphics card:

1. Integrated Graphics : Enabled
2. Graphics: PEG/PCIe Slot 1
3. Initial Display Output : PCIe 1 Slot
4. DVMT Pre-Allocated : 128M or higher

Your system may not have all these settings, some may have different names, some may be hidden within other settings, CSM and UEFI booting being the ones to spring to mind.

You will also need to make sure your Graphics options are set correctly, i.e. Intel graphics enabled, and PEG or External set as default, so your GTX650 is priority graphics option.

Thank you