- Joined
- Jul 30, 2012
- Messages
- 29
- Motherboard
- GA-Z270X-Gaming 7
- CPU
- i7-7700K
- Graphics
- RX 580
My boot and system log is flooded with this looping exception and attempted recovery, it happens repeatedly:
I found a similar thread located here: https://www.tonymacx86.com/threads/usb3-xhci-problems.235265/ but I didn't want to highjack the thread with my own problem. The advice in the thread by @VioletDragon was to "delete ports", can anyone elaborate as to how I would go about doing that?
Code:
2019-08-06 01:01:42.183237-0700 0x73e84 Default 0x0 0 0 kernel: (AppleUSBEHCI) 065228.436001 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x00010330 USBSTS 0x0000e00c
2019-08-06 01:01:42.245710-0700 0x1f1 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065228.498481 AppleUSBEHCIPort@40100000: AppleUSBHostPort::forcePowerGated: kPowerStateSuspended completed with 0xe00002d6 after 1002ms
2019-08-06 01:01:42.285030-0700 0x73e98 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065228.537802 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000010
2019-08-06 01:01:42.453231-0700 0x73e98 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065228.706014 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-08-06 01:01:42.453239-0700 0x73e98 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065228.706022 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000008
2019-08-06 01:01:42.453243-0700 0x73e98 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065228.706028 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-08-06 01:01:42.558160-0700 0x73e84 Default 0x0 0 0 kernel: (AppleUSBEHCI) 065228.810903 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x00010330 USBSTS 0x0000e00c
2019-08-06 01:01:42.660242-0700 0x73e99 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065228.913014 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000010
2019-08-06 01:01:42.662988-0700 0x73e99 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065228.915764 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-08-06 01:01:42.663013-0700 0x73e99 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065228.915794 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000008
2019-08-06 01:01:42.663028-0700 0x73e99 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065228.915810 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-08-06 01:01:42.767135-0700 0x73e9b Default 0x0 0 0 kernel: (AppleUSBEHCI) 065229.019878 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x00010330 USBSTS 0x0000e00c
2019-08-06 01:01:42.869358-0700 0x73e96 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065229.122129 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000010
2019-08-06 01:01:42.871722-0700 0x73e96 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065229.124488 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-08-06 01:01:42.871765-0700 0x73e96 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065229.124540 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000008
2019-08-06 01:01:42.871795-0700 0x73e96 Default 0x0 0 0 kernel: (IOUSBHostFamily) 065229.124575 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-08-06 01:01:42.974541-0700 0x73ea2 Default 0x0 0 0 kernel: (AppleUSBEHCI) 065229.227304 AppleUSBEHCIPI7C9X440SL@40000000: AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x00010330 USBSTS 0x0000e00c
I found a similar thread located here: https://www.tonymacx86.com/threads/usb3-xhci-problems.235265/ but I didn't want to highjack the thread with my own problem. The advice in the thread by @VioletDragon was to "delete ports", can anyone elaborate as to how I would go about doing that?