- Joined
- Mar 10, 2010
- Messages
- 9
- Motherboard
- EVGA X58 LE SLI
- CPU
- i7-920 Processor (8M Cache, 2.66 GHz, 4.80 GT/s Intel® QPI)
- Graphics
- EVGA NVIDIA Gefore GTX 280
- Mac
- Classic Mac
- Mobile Phone
Hello, I have been running a Hackintosh since Leopard days. My current system which I have been using for the past 4 years is as followed:
EVGA X58 LE
Graphics: EVGA GTX 280
Everything works using either Chimera or Clover. Recently I purchased a second graphics card to drive my third monitor that I just picked up: EVGA GTX 260 ( I tried to order something as close to what I already own ). This card is installed in a 4X slot (motherboard suggestion for 2 graphics card).
For both graphics card when I try to use them individually I need to use GraphicsEnabler=Yes, PciRoot=1 for proper boot. I am using DVI on all 3 ports.
However, when booting the system with both cards in things seem normal with -v (no obvious errors), but graphics end up kicking off at the end (like I forgot to put GraphicsEnabler=Yes or PciRoot=1).
On Clover I have tried injecting the kext on both cards with the same result.
I also tried VideoPorts=4.
Any ideas what other things I can try to get the system to boot properly with graphics?
I end up being forced to installing Windows just to test the graphics card...
Is a 16X slot required for a Hackintosh Graphics Card?
Thank you for your time.
EVGA X58 LE
Graphics: EVGA GTX 280
Everything works using either Chimera or Clover. Recently I purchased a second graphics card to drive my third monitor that I just picked up: EVGA GTX 260 ( I tried to order something as close to what I already own ). This card is installed in a 4X slot (motherboard suggestion for 2 graphics card).
For both graphics card when I try to use them individually I need to use GraphicsEnabler=Yes, PciRoot=1 for proper boot. I am using DVI on all 3 ports.
However, when booting the system with both cards in things seem normal with -v (no obvious errors), but graphics end up kicking off at the end (like I forgot to put GraphicsEnabler=Yes or PciRoot=1).
On Clover I have tried injecting the kext on both cards with the same result.
I also tried VideoPorts=4.
Any ideas what other things I can try to get the system to boot properly with graphics?
I end up being forced to installing Windows just to test the graphics card...
Is a 16X slot required for a Hackintosh Graphics Card?
Thank you for your time.