<< Solved >> "acpi error" after bios update

[Eric12324]

I almost successfully installed Mojave three days ago.
but after I update my laptop's bios, I can't boot into system and got this "acpi error:7 table load failures...."
I try to install again but got the same error
I try different config.plist /delete kext/different clover version nothing work , I just get the same error
I have set the bios option as installation guide
already press F2 and F4 at main clover screen，please help me!

(CLEVO NB70TK1/ intel i5 8500 / H370 /Gtx 1050ti and UHD630)

 

[Feartech]

I almost successfully installed Mojave three days ago.
but after I update my laptop's bios, I can't boot into system and got this "acpi error:7 table load failures...."
I try to install again but got the same error
I try different config.plist /delete kext/different clover version nothing work , I just get the same error
I have set the bios option as installation guide
already press F2 and F4 at main clover screen，please help me!

(CLEVO NB70TK1/ intel i5 8500 / H370 /Gtx 1050ti and UHD630)
View attachment 389079

unibeast is mainly for desktops

Read up on the FAQ first:

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

Link to laptop guide:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

 

[Eric12324]

unibeast is mainly for desktops

Read up on the FAQ first:

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

Link to laptop guide:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

error remains


I noticed that "Note regarding CPU power management and SSDTs " in guide
I try to set "Drop Oem=ture and CStates/PStates=true "
error seem less but still stuck


thank you for your reply

 

[RehabMan]

error remains
View attachment 389290

I noticed that "Note regarding CPU power management and SSDTs " in guide
I try to set "Drop Oem=ture and CStates/PStates=true "
error seem less but still stuck
View attachment 389296

thank you for your reply

Your profile indicates Nvidia only. Is it accurate? Check in Windows Device Manager/monitor properties in Windows.

 

[Eric12324]

Your profile indicates Nvidia only. Is it accurate? Check in Windows Device Manager/monitor properties in Windows.

It is a dual graphics laptop
I modified my profile
I only intend to use UHD630 and disabling discrete graphics

 

[RehabMan]

It is a dual graphics laptop
I modified my profile
I only intend to use UHD630 and disabling discrete graphics
View attachment 390032

You should check in Windows to see which ports are attached to each graphics device.

 

[Eric12324]

You should check in Windows to see which ports are attached to each graphics device.

I do not understand what you mean
What should I do to check the ports?
This laptop uses a replaceable desktop CPU
The discrete graphics card is soldered to the motherboard
I am sorry that it took so long to reply.

 

[GffMaC]

I do not understand what you mean
What should I do to check the ports?
This laptop uses a replaceable desktop CPU
The discrete graphics card is soldered to the motherboard
I am sorry that it took so long to reply.
View attachment 392695

if you connect displays to each connection you can see which gpu is running through which connection. For example:

 

[Eric12324]

if you connect displays to each connection you can see which gpu is running through which connection. For example:

Thanks
I got the original bios file from the vendor.
After flashing, the problem is solved.