Contribute
Register

Acer Aspire 5755g not booting with clover

Status
Not open for further replies.
Luckykhan

Luckykhan

Joined
May 9, 2015
Messages
32
Motherboard
HP Envy 15-Q004tx Clover
CPU
i7 /HM87 > Need full CPU name > See Forum Rules!
Graphics
HD 4600 / GTX 850M, 1366*768
Mobile Phone
  1. Android
  2. iOS
Acer
Other |  i5 6600 |  HD 530
Luckykhan said:
Hi,

I made my boot usb with UEFI ,clover v3556, following the guide from Rehabman.
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
Copied all the necessary kexts and plist but i can't boot to usb. I would appreciate help on this.


Processor i5 2410m
Sandy bridge
chipset intel HM65
Intel HD graphics 0x1025 (0X0504) 1366x768

Regards
Click to expand...

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).
 
RehabMan said:
Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).
Click to expand...
Dear Rehabman,
its not booting at from usb when i select usb from boot menu by pressing F12
regards
 
Acer
Other |  i5 6600 |  HD 530
RehabMan said:
If you're not reaching Clover, then you created the USB incorrectly or have incorrect BIOS settings.

https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
Click to expand...
Dear Rehabman,

I installed clover v 3556 in legacy, after that i was able to boot and started installation in verbose mode got panic. attached are the pic of the panic screen and clover efi folder for your review and advice.

greatful as always for your help.

regards
 

Attachments

  • IMG_20161012_184458.jpg
    IMG_20161012_184458.jpg
    3.8 MB · Views: 137
  • EFI.zip
    2.4 MB · Views: 79
Acer
Other |  i5 6600 |  HD 530
Luckykhan said:
Dear Rehabman,

I installed clover v 3556 in legacy, after that i was able to boot and started installation in verbose mode got panic. attached are the pic of the panic screen and clover efi folder for your review and advice.

greatful as always for your help.

regards
Click to expand...

From where did you download OS X?
On what hardware did you create your USB installer?

There is a guide for your laptop in your profile (your post here is off-topic): https://www.tonymacx86.com/threads/...-series-j-k-q-using-clover-uefi-10-11.168613/

It uses Clover UEFI.
 
RehabMan said:
From where did you download OS X?
On what hardware did you create your USB installer?

There is a guide for your laptop in your profile (your post here is off-topic): https://www.tonymacx86.com/threads/...-series-j-k-q-using-clover-uefi-10-11.168613/

It uses Clover UEFI.
Click to expand...
i downloaded OS X from app store using my hack which is in my profile. i did that using your guide. now i have this second laptop which spec are

i5 second gen sandy bridge
4 gb ram
chipset intel HM65
Intel HD graphics 0x1025 (0X0504) 1366x768

regards
 
Acer
Other |  i5 6600 |  HD 530
Acer
Other |  i5 6600 |  HD 530
Luckykhan said:
Signature updated, i managed to install El Capitan, but now getting boot0af error when i am booting from HDD. I can only boot from USB installer. Appreciate help on this issue

regards
Click to expand...

Read the guide carefully. There are choices other than boot0af.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top