- Joined
- May 11, 2012
- Messages
- 20
- Motherboard
- Asus P8H61-USB3
- CPU
- Intel Core i3 2100 - 3.10GHz
- Graphics
- Asus AMD Radeon HD 6770
- Mac
- Classic Mac
- Mobile Phone
At first...
This is my system:
MB: Asus P8H61 USB3 (Audio: Realtek ALC 887)
Graphic: AMD Radeon HD 6870
CPU: Intel Core i3
I used Unibeast to make a bootable usb.
I installed Mountain Lion completely. (before the installation, I removed "ATI6000Controller.kext" from USB/System/Library/Extensions )
after the installation, I put "ATI6000Controller.kext" in desktop and I used KextBeast to install it. (according to this page : http://www.tonymacx86.com/mountain-...mountain-lion-6xxx-gpu-issues-fix-inside.html )
but after the restart, it still can't know my graphic card and I have a very low resolution.
the main problem is...
when I install the MultiBeast, After the Restart, I can't boot to my OS (it gets a black screen). :?
( I only enabled "Realtek Audio ALC 887/888b Current" and "bootloader" in MultiBeast)
and another problem, when I use Mac OS, the fan of my CPU starts moving fast! (it is noisy!)
but the CPU usage is about 2~5% !
before, I heard this noise when the CPU usage was high (e.g. 90%) in the Windows.
I didn't install any DSDT, is it because of that?
If you know What I have to do, Please tell me.
If you know a tested way for Install ML on my system, Again Please tell me!
If you Know someone who installed ML on same system, give me his email.....
and last question...
Why I have to install my motherboard DSDT?
What does DSDT do ?
Do you have DSDT of this model?
This is my system:
MB: Asus P8H61 USB3 (Audio: Realtek ALC 887)
Graphic: AMD Radeon HD 6870
CPU: Intel Core i3
I used Unibeast to make a bootable usb.
I installed Mountain Lion completely. (before the installation, I removed "ATI6000Controller.kext" from USB/System/Library/Extensions )
after the installation, I put "ATI6000Controller.kext" in desktop and I used KextBeast to install it. (according to this page : http://www.tonymacx86.com/mountain-...mountain-lion-6xxx-gpu-issues-fix-inside.html )
but after the restart, it still can't know my graphic card and I have a very low resolution.
the main problem is...
when I install the MultiBeast, After the Restart, I can't boot to my OS (it gets a black screen). :?
( I only enabled "Realtek Audio ALC 887/888b Current" and "bootloader" in MultiBeast)
and another problem, when I use Mac OS, the fan of my CPU starts moving fast! (it is noisy!)
but the CPU usage is about 2~5% !
before, I heard this noise when the CPU usage was high (e.g. 90%) in the Windows.
I didn't install any DSDT, is it because of that?
If you know What I have to do, Please tell me.
If you know a tested way for Install ML on my system, Again Please tell me!
If you Know someone who installed ML on same system, give me his email.....
and last question...
Why I have to install my motherboard DSDT?
What does DSDT do ?
Do you have DSDT of this model?