980 TI

[LPillmann]

Hi all,

I am not a specialist or pro - so forgive me my ignorance..
little problem I got with my selfbuild:

GIGABYTE Z170X-SOC Force Super Overclocking LGA115
Intel Core i7-6700K Prozessor (8MB Cache, LGA1151, 4GHz)
GIGABYTE GeForce GTX 980TI GAMING 6GB DDR5 DVI-I /
....
I had a NVIDIA GTX960 SSC card before, which was running fine but could not work with Davinci for filmedits.
So I changed to 980 TI installed all drivers and did all this bootflag thing - but it seems that the card does not work properly because I have a screen resolution of 1280x1024 only and can't switch or choose.
The sound is also not working...
My Monitor is Eizo coloredge CG222w.
Now desperate and can't find a solution.

Thanks for any hint or help.
best, Lars

 

[Fl0r!an]

Should have been a matter of simple plug'n'play if you had your GTX 960 working before.

The drivers are obviously not loaded. Make sure your Nvidia Web Drivers match your OS X build revision and that they're properly activated (nvda_drv=1).

 

[LPillmann]

thanks for your fast answer, if I change bootflag to (nvda_drv=1) the screen stays black after loading...

 

[Fl0r!an]

Have a look here: http://tonymacx86.com/threads/black...-imac-15-or-imac-17-system-definition.183113/

 

[bobby7sharma]

Have a look here: http://tonymacx86.com/threads/black...-imac-15-or-imac-17-system-definition.183113/

Dear Florian you are a genius. The AMD comaptibility guide is wonderful. But I am an Idiot. I bought R7 360 Nitro. As expected it is not working. Any help from your side will be greately appreciated.

 

[LPillmann]

Hi Florian,
thanks. I am an idiot as well... not shure if I'll manage to find the right source...