6 Minutes for graphics card to wake (GTX 660)

[minihack]

Okay, any thoughts or similar (or different) experiences or help welcomed on this!

My system: Zotac Z77 ITX, MSI Twin Frozr 660 GTX, ML 10.8.2

I am using the latest Nvidia drivers (which work well) and am happy with the card, but have just noticed this issue. The system will sleep well (sleep button or scheduled sleep) but when using the 660 it looks like it will not wake up. Machine powers on, but the screen takes 6 minutes to come up from me pressing mouse or keyboard.

The console does not give much of a clue, except that it only registers a wake event just at the point where the screen comes back up. What I mean by this is that if I put it to sleep and do an immediate wake - the machine powers on then with a black screen, but does not give any output until the 6 minutes have gone by and, at that point is when Console says that it received a "Wake Event".

If I disable the graphics card in bios and work from my internal graphics then sleep and wake work as they should.

So, clues anyone? Has anyone else got this with a Kepler card?

Console messages below:


15/10/2012 10:23:54.943 WindowServer[120]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)
15/10/2012 10:23:58.000 kernel[0]: hibernate image path: /var/vm/sleepimage
15/10/2012 10:23:58.000 kernel[0]: sizeof(IOHibernateImageHeader) == 512
15/10/2012 10:23:58.000 kernel[0]: kern_open_file_for_direct_io(0) took 0 ms
15/10/2012 10:23:58.000 kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 400000 ssd 0
15/10/2012 10:23:58.000 kernel[0]: hibernate image major 1, minor 9, blocksize 512, pollers 5
15/10/2012 10:23:58.000 kernel[0]: hibernate_alloc_pages flags 00000000, gobbling 0 pages
15/10/2012 10:23:58.000 kernel[0]: hibernate_setup(0) took 0 ms
15/10/2012 10:24:04.000 kernel[0]: hibernate_page_list_setall start 0xffffff80d20ef000, 0xffffff80d212f000
15/10/2012 10:24:04.000 kernel[0]: hibernate_page_list_setall time: 214 ms
15/10/2012 10:24:04.000 kernel[0]: pages 490668, wire 114297, act 104705, inact 338, cleaned 0 spec 83, zf 430, throt 0, could discard act 48263 inact 39625 purgeable 5833 spec 177094 cleaned 0
15/10/2012 10:24:04.000 kernel[0]: hibernate_page_list_setall found pageCount 219853
15/10/2012 10:24:04.000 kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
15/10/2012 10:24:04.000 kernel[0]: IOHibernatePollerOpen(0)
15/10/2012 10:24:04.000 kernel[0]: encryptStart 13290
15/10/2012 10:24:04.000 kernel[0]: writing 217682 pages
15/10/2012 10:24:04.000 kernel[0]: encryptEnd 5944800
15/10/2012 10:24:04.000 kernel[0]: image1Size 0xa149200, encryptStart1 0x13290, End1 0x5944800
15/10/2012 10:24:04.000 kernel[0]: encryptStart a149200
15/10/2012 10:24:04.000 kernel[0]: encryptEnd 169b0400
15/10/2012 10:24:04.000 kernel[0]: PMStats: Hibernate write took 3855 ms
15/10/2012 10:24:04.000 kernel[0]: all time: 3855 ms, comp bytes: 891625472 time: 496 ms 1713 Mb/s, crypt bytes: 303662960 time: 371 ms 779 Mb/s,
15/10/2012 10:24:04.000 kernel[0]: image 379257856, uncompressed 891625472 (217682), compressed 368994080 (41%), sum1 ee8d606, sum2 92ca2eb2
15/10/2012 10:24:04.000 kernel[0]: wired_pages_encrypted 47966, wired_pages_clear 64160, dirty_pages_encrypted 105556
15/10/2012 10:24:04.000 kernel[0]: hibernate_write_image done(0)
15/10/2012 10:24:04.000 kernel[0]: sleep
15/10/2012 10:30:25.000 kernel[0]: Wake reason: GLAN EHC1
15/10/2012 10:30:25.000 kernel[0]: RTC: PowerByCalendarDate setting ignored

 

[forestf255]

I got something a little similar, my gtx 660 card just doesn't wake at all, when its in the top pci express slot, yet when its in the bottom slot it works fine. using a ga-z77-ds3h

 

[minihack]

Have you tried leaving it for up to 10 minutes to see if it does eventually wake?

 

[hapdo]

Did you use a DSDT it?

Try not to use

do not to use DSDT is ok , my motherboard is GA-77X-UD3H

 

[minihack]

Thank you.

As I am using HDMI audio and a few other things I need DSDT. I did try though without DSDT now and you are right.....it starts up fine from wake...and then when I put the DSDT back into Extra the problem returns.

So at least now I can go back and compare my DSDT to the native DSDT (even if you do not add an edited DSDT there is always a native DSDT there) and track down the problem. At least I know that there is a solution and so hopefully a little testing will solve the problem.

 

[hapdo]

Thank you.

As I am using HDMI audio and a few other things I need DSDT. I did try though without DSDT now and you are right.....it starts up fine from wake...and then when I put the DSDT back into Extra the problem returns.

So at least now I can go back and compare my DSDT to the native DSDT (even if you do not add an edited DSDT there is always a native DSDT there) and track down the problem. At least I know that there is a solution and so hopefully a little testing will solve the problem.

I using VoodooHDA 2.7.4 is work HDMI audio to Monitor,

I not use DSDT cannot turn on my IVY 3770CPU HD4000,but i don't care

 

[minihack]

Yeah, it is all okay now. Got DSDT working and waking okay.