Search results

Here's how I activated my USB 3.0-Ports (I haven't had a chance to test it with actual USB 3.0-Devices since I don't own any yet, but I'm positive). Running 10.8.5 BIOS-Settings: xHCI-hand-off: Enabled Multibeast: USB3-Universal-Driver from the Drivers-Section -> Restart All my USB 3.0 Ports...

Hey Guys, I experienced a similar, if not the same, problem: I regularly lose connection with my Mighty Mouse. I can only reconnect if I delete the device from the BT-devices list and re-add it. A few seconds after the connection is established I get a notice that the connection is lost...

Yes I'm currently on 10.8.4.

Hey Ordianry, have you tried installing the Universal Driver? If so, how does it work? I have the same board and since I couldn't get the USB3-ports to support most USB2 devices, I set up my bios to treat them all as USB2 - but thats not a satisfactory solution, of course. I'm wondering if...

I have ordered the IOGear GBU521 now, hoping that shipping from the US to Europe won't take too long. I'll share my experience once it's here.

Thank you. I am also at darkwake=0 now and at least it hasn't made it worse so far. I believe I have tracked the actual problem down to my Belkin Bluetooth dongle as the terminal showed me that the wake-up is always cause by a USB device... cheers!

Hey benjenq, hopefully not too of-topic for this threat: I have the GA-Z77-DS3H and your profile tells me that you also own the same board. Have you tried your solution on the DS3H as well? If so does it work? I suppose these settings would be correct for most Gigabyte UEFI boards, including...

Hey kaithefinn, thank you for your attempt to help me solving my problem. I believe it brought me closer to the solution: I have checked a number of lists and could not find any hint suggesting that my GA-Z77-DS3H might have a general issue that is preventing a normal sleep/wake behaviour...

Hi iJanni, I came across a threat when I was searching for a fix for an issue I am struggling with: Quite often (but not always) when I tell my Hack to sleep it powers down but only to wake up a second later. :crazy: Did you find a fix for that? If so, how did you do it? I'm also using the...

Really, am I the only one who how is experiencing this issue? Or is it to complex to address? It is somewhat annoying to see your computer wake up after you have told it to sleep. I also wonder if it might do harm to some parts. I am thankful for ever hint or shared experience...:crazy:

Hi guys, I am running my first Hackintosh build and I can say it is at least 95-98% working as it is supposed to. Here is my main concern: Sometimes (but not always) when the computer goes to sleep (manual or auto-sleep) it instantly wakes up after just one second or so. It's been like this...

I updated to 10.8.3 yesterday night using the combo update. Before running the update installer I installed Nvidia's new Cuda drivers. Then the OS X update. Before the restart I re-installed the audio driver from MultiBeast. No problems at all. The name 'GTX 650 Ti' is no longer reported under...

Article: OS X 10.8.3 Update Ritey, here's my build: CPU: i5 3570K @ 3.4 GHz Board: Gigabyte GA Z77-DS3H RAM: 8 GByte Corsair Vengeance Oh, and it's Gigabyte's overclocked GTX 650 Ti.

Hey guys, I just installed the update and everything appears to be running just like it should. My graphics card: Gigabyte GeForce GTX 650 Ti 1 GByte Here's what I did: -Downloaded Combo-Update 10.8.3 and the new Nvidia Cuda-Driver -Installed Cuda-Driver -Installed OS X-Combo-Update...

I have a Gigabyte GTX 650 Ti Overclocked 1GByte running really well in my build: Gigabyte GA Z77 DS3H i5 3570k @ 3.4 GHz 16 GByte RAM Here's what I did to get it going: Put all parts together, except for the GTX 650 Ti Pugged screen into the motherboard's DVI-port Set the right...

Thats right. I had to install Windows in UEFI mode because it wouldn't accept a GPT disk. I chose GPT because it was recommended in this http://www.tonymacx86.com/snow-leopard-desktop-guides/18658-guide-multibooting-novice-updated-3-12-see-log.html (link). I didn't expect it to be a problem for...

Thank you for the quick reply! While I was preparing to what you suggested, I noticed that when I hit F12 after starting my computer, one of the bootable drives is called 'Windows Boot Manager'. When I choose this drive Windows boots absolutely fine. I now suppose that the Windows partition...

Same here, mice and keyboards work when plugged into USB3-Ports but USB-Stick Drives and Hard Drives don't (both USB2). I couldn't test USB3-Drives though, since I don't own any. Will the LaCie-Driver fix this? I remember reading something in MultiBeast about not using it for the 7-Seris...

Hi everyone, I'm encountering the same problem when I select Windows 7 from the Chimera screen: Has anyone found a solution to this yet? It feels like I've spent hours googeling already but so far no search came up with an idea... Thank you for any hints!