Search results

Loading Google Results...
  1. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    @thrf: You have to lookout this post of CaseySJ again. That is at least what made everything work for me. The fact that your RAM is Corsaire doesn't matter (probably it doesn't really matter at all what you write in these fields except for the first three columns and the last). You have to fool...
  2. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Without much clue about hardware or software, this makes a lot of sense to me. Hey, this is a hackintosh - it is not a supported system anyway, so, everybody has to know, there is a risk that hardware goes wrong with any supported system and with a hack, there always might be additional risk! If...
  3. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    It wasn't meant as an offence and I am sorry if it came across like that! I just found a lot of people warning to use this driver, including moderators. I was asking, if you still use this driver, if you were just using it to get macOS installed. But now I know, that you really use it for a...
  4. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Yes, that worked! Thanks a lot. I could boot into my installation with AptioMemoryFix.efi (the one with Clover does not include 64 in the name, in case that should mean anything ...). I disabled the iGPU in bios and also unchecked "inject intel" in clover config. Now, I feel a bit safer. ;-) I...
  5. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    I just realised that there are warnings concerning this driver from the developer himself, so, I guess it is to be taken seriously. I just replaced OsxAptioFix2Drv-free2000.efi with AptioMemoryFix.efi. I get the Memory allocation problems after booting in the system that way, so I had to boot...
  6. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Which connection does it see and which one not? Maybe it is similar to my problem.
  7. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    I just installed Catalina on an additional backup of my working Mojave installation (iMac 19,1). During my install I had a pretty smooth progress bar counting down from 26 minutes (nothing like in CaseySJ's post described). The system also did not restart. After the installation process I...
  8. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    So, probably, Sidecar will only run for builds without t2 chip? That information comes at the right time, as I was just about to try out AptioMemoryFix and therefore changing to iMac Pro 1,1. I will wait with that now ...
  9. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Yeah! Display Port works now after doing 1 - 3! Thanks!
  10. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Thanks! Just one more question: would you recommend that for my system as well? I do audio stuff. I might here and there cut some videos with final cut in the future, but that is only a side aspect. Is AptioMemoryFix recommendable over free2000? And why is it relevant to disable the iGPU...
  11. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    I checked all the other drives' EFI partitions. I did find a MacOS folder with some files on one of the data disks EFIs (which should not contain any), so I removed that. The only Windows folder is to be found on the Windows Boot disks EFI partition. This should not be removed, right? Otherwise...
  12. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Yup, that is what I assumed ... but after swaping the NVMes my Windows disk and its EFI is still on disk 3! Is that a problem? Would I have to reinstall Windows with all other disks removed to fix that?
  13. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    In the initial post there is a section about installing Windows 10 on the NVME slot closer to the CPU. I found out I did that the wrong way, so I just swapped them (Windows is now on the upper NVME slot, macOS on the lower slot). That did not cause any problems with both installations, but I am...
  14. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    It is an LG 29EA93 and an Acer T272HULbmidpcz. I am using a DP to DP cable and both monitors work fine with DVI or HDMI of the RC 580 Pulse. I did that and here is the file. The device shows up here: EDIT: Damn me! Suddenly it works ... I cannot even tell what helped ... I just restarted the...
  15. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    That would be great for comparison! Why did you go for the iMac pro vs the iMac 19,1? What I read in the instructions, the iMac pro is only recommended for systems without iGPU and your processor has it. Not trying to argue, just trying to understand the reasoning! :) Which RX 580 Model are you...
  16. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    And there is one more thing I cannot get to work: I have this professional audio Interface by RME (Madiface XT): https://www.rme-audio.de/madiface-xt.html I installed the drivers, did some research regarding RME and Mojave and Hackintosh, but it does not work. After installing the drivers, the...
  17. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    My main monitor is connected via DVI to the Radeon 580. I could connect the second monitor via DVI, but I had no luck connecting anything via Display port. Searching this thread and the internet, I could only find people having problems with older versions of Mojave (I am on 10.14.6). Are there...
  18. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Thanks for checking it out! If you look two post further, I have found out that there was not Memtest problem showing up on my backup. So, probably FakeSMC replacement with VirtualSMC or some of the other modifications of "going the extra mile" has caused it. Would you share your full settings...
  19. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Wait ... I just did the same MemTest on my last backup on the external SSD. This was done before "Going the Extra Mile". Looks like the MemTest is going just fine there, so, some of the other steps must have screwed something up. It could only have been installing VirtualSMC instead of FakeSMC...
  20. FriFlo

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    @CODYQX4 @bielxxx You guys have tremendously helped me in getting the 128GB of RAM working. However, running MemTest I ran into some problems ... these are the results: This is what my configuration on Clover looks like (it goes on with Slot 6 and 7, as I have full 128GB of memory...
Back
Top