Search results

I was only using one at a time man. I ended up snagging a 2nd card, same model, and it works pretty well. The Studiolive console wasn't recognized though until after I got a legacy driver off of the Presonus website. The band I am working with just so happens to know an ex Presonus rep, so he...

Hey everyone, I'd just like to chime in here. I recently snagged the Syba SY-PEX30016 for use with a Presonus 32.4.2ai sound console. I haven't had access to the soundboard since I received the card, but it has been very inconsistent with connecting to two Rocstor firewire800/400/usb2 combo ext...

I suppose I worded that incorrectly. I didn't see much of a latency improvement when using Amplitube 4. I did see the CPU usage drop 10 to 15 %

See link below. It is the Sonnet Presto. I believe they have different versions with more ports, but mine only has one and it was plug and play. It took me a bit to get the MOTU side of things figured out though. Basically, the interface will talk to the AVB card right out of the box, but it...

I never had USB drop-outs, but I had to buy a new ethernet card that avb compatible. It was made by Sonnet and works very well

That's the one! Is there any downside to using one of those rather than creating one specifically for my cpu? I don't really care if the power management is perfect, but I do want it to downclock when it doesn't need to run as hard. I'm probably going to get the 6600k since its only 180 bucks...

Hi everyone, I currently have an i3-6300 installed in my hackintosh build. I use it solely for audio recording and production. Lately, I've noticed the CPU usage is pretty high when running Amplitube 4. I am considering sticking a 6600k or 6700k in to better handle the load that multiple vst...

I too am interested in getting my 1248 to work over AVB. Is there any update on what network card this will work with?

I installed the IOAPIC fix. Things still seem to be mostly working. I did some recording and video editing yesterday and everything was snappy. There are a few things that are still a little funky though. 1) About 3/4ths through the booting screen, my display goes black and a couple seconds...

I did use the ssdt-usb.aml file and it is working as far as I can tell. Only the ports I mapped are showing up in IOregistryexplorer, as they should be. I only mapped 6 ports though so there are only 6 in the SSDT-USB file. That is why I'm think the port limit doesn't need to be changed. It is...

Okay so the USB stick I was getting slow write speeds on was just a shitty Sandisk stick. I tested it and a few others along with an external USB3 HDD and I am getting both read and write speeds at over 100 MB/s now. I am really not sure why I need to lower the port count if they are all work...

The only bit I saw in that guide for disabling the ports in config.plist was for keeping it under 15. I only used the motherboard ports so it's way below fifteen and didn't sound like I should do it. You think I should?

Okay, so I finally resolved the syntax error and put the .aml file in my patches folder, rebooted, and checked IORegistryExplorer. The ports that I want to show up there are all there, but the transfer speed to a Usb3 stick still doesn't seem right. It takes nearly 2 minutes to transfer a 1.3...

I keep getting a syntax error when I try to compile in MaciASL. it says: unexpected ',', expected ')' The error it highlights when i click it is exactly how the guy has his commas in the guide.

Okay I am nearly through mapping. I am just skipping all of the ones that are on headers and using my highest USB3 of the two SS ports that I have as the highest port value for the port count. Should I do the IOAPIC fix before installing the SSDT-USB.asl file? I read in that same post that it...

Oh and the IOAPIC Fix is still required in order for the mapping to work, correct?

I just got home and applied the SSDT for my CPU. Looks like that worked, but the issue with hardware monitor was that I forgot to install the plugins for the cpu, gpu, etc. GO FIGURE. I did try a 1.2 GB transfer to a USB 3 drive through my USB 3.1 port and it took like 2 minutes so it isn't even...

I can see the USB 3 and 3.1 buses, but that USB 3 doesn't run faster than USB 2 speeds. This was the case last night at least. I did not try on the 3.1 ports

Okay, now that I read further into that thread it looks like others were questioning why they weren't seeing the 3.1 ports in the IOregistry software. I am guessing this is because they are on a different controller and as you say work out of the box. I don't have any 3.1 devices, but I should...

Okay, I already have another question lol. I believe my USB 3.1 ports are on AsMedia controllers. That's what the Asus specs say here: https://www.asus.com/us/Motherboards/Z170-A/specifications/ Can I use the GenericUSBXHCI.kext for those and it be excluded from the 15 port limit that my...