Search results

So to flash this I should back up my existing rom, flash with this one and it should be good to go? I just don’t want to brick the card. Thanks for the reply.

Hello, I have a working Hackintosh, But recently acquired a Mac Pro early 2008 tower. It came with a Nice Graphics card. The Card is a Nvidia GTX 770 and works fine except for the Boot screen where you can select the boot volume, start up in Single user Mode, etc. I have heard that you can...

Sorry for the very long delay in getting back to this post. Thank you for your help. I will see how to Back up the Bios on the Nvidia Card and load it here. I also bought recently a Nvdia Geforce 8800 thinking it was the mac version so I could just boot using that video card, however it is the...

Hello, I recently bought a Mac Pro off ebay that came with an Nvidia GeForce GTX 770 video card. Everything works fine, except for the boot screen where you could hold down the Option key to select the Drive you want to boot from, the Single user mode, etc. Can you use Multi-Beast to install...

hello everyone, I recently built a hackintosh and it's working fine. I am about to buy a 2008 Mac Pro and want to upgrade the video. I was going to buy the same card as I did for my hackintosh computer but it doubled in price since I bought it a few months back. EVGA GT 740. What would be a...

sorry about that. here is the right report. Thanks again for your help. ubuntu@ubuntu:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) 00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045]...

ok here is the report from Ubuntu ubuntu@ubuntu:~$ lspci /-nn Usage: lspci [<switches>] Basic display modes: -mm Produce machine-readable output (single -m for an obsolete format) -t Show bus tree Display options: -v Be verbose (-vv for very verbose) -k Show kernel drivers handling each...

OK I will do that in the morning. thanks again for your help.

I am not sure how to do that. Is that on the HP Pavilion laptop? if so all I can do is get to a certain point in Verbose mode and it stalls or freezes. If you mean on the Macintosh that I build the USB drive on I can open terminal and paste that command in the terminal and copy those results...

Hello and first off thank you for any help you can provide. As with many here I am relatively new to the Hacintosh world. I have used regular Mac's for quite a long time dating back to a Mac SE with HD and floppy. I have searched this site and others, Watched several YouTube videos that show...

I may have found my own solution, so I will leave this here for others who may have the same issue. I loaded up the Hackintosh drive via the same USB drive used to install and configure using Multibeast. I booted into the Hackintosh from there, then re-ran the Multibeast app using my saved...

Hello, I was able to successfully make a Hackintosh computer, however, after making the hackintosh, I wanted to use one keyboard, mouse, and video so I hooked up an IOGEAR KVM switch. When I go to boot the computer, it's starts to load, i get the Apple, the progress bar moves to just over 1/3...

OK, so based on your recommendation and one of the Build Lists I found, here is what I am considering going with: CPU = Intel Core i3-4360 Processor (4M Cache, 3.7ghz) BX80646I34360 from Newegg.com Motherboard = Gigabyte GA-H97M-D3H LGA 1150 Intel H97 HDMI SATA 6GB/s USB 3.0 Micro ATX Intel...

Greetings one and all, I want to build a reliable Hackintosh, and I have been trying all that I can (with what little knowledge I have read so far on this forum and elsewhere) using the guides provided by this site. I will list what hardware I currently have, and while I am open to buying a...