- Joined
- May 1, 2014
- Messages
- 9
- Motherboard
- ASUS PRIME Z490-A
- CPU
- i9-10900
- Graphics
- RX 570
I just upgraded to 10gen my current setup (OC-0.95). Change Opencore to the one provided and remove boot args and setup iMac 20,2, move the NVME to the new setup and everything worked without errors.
BIOS was at 804, early bios. So today I upgraded to the latest 2701 bios. Reboot, put setting back and computer started to reboot itself, even not logging in. Remove any "fake OC" and whatever, and again not stable and reboots.
Can't rollback to 804.
CPU is i9 10900 -non K- and memory Crucial 2x32gb 3200 MT/s with XMP 22-22-22-52.
I'll be doing some test, on what would make OSX reboot and crash in OS.
My guess is something going on with XMP + Asus OC crap
TEST: On linux seems to be fine, temps are fine, stress test are fine.
When I managed to boot into Ventura some times crashes and goes to login, and then reboots, also if I manage to run a cinebench stress, it reboots in less than a minute.
Now the computer boots to login screen, if you log in, shows the system was not properly shutdown and reboots itself.
All of this happened after bios update. Was running fine and doing bench.
EDIT: I've got the same installation with ventura 13.4 that I cloned to upgrade the storage, and it boot fine with the previous settings. Something went really bad on that install
BIOS was at 804, early bios. So today I upgraded to the latest 2701 bios. Reboot, put setting back and computer started to reboot itself, even not logging in. Remove any "fake OC" and whatever, and again not stable and reboots.
Can't rollback to 804.
CPU is i9 10900 -non K- and memory Crucial 2x32gb 3200 MT/s with XMP 22-22-22-52.
I'll be doing some test, on what would make OSX reboot and crash in OS.
My guess is something going on with XMP + Asus OC crap
TEST: On linux seems to be fine, temps are fine, stress test are fine.
When I managed to boot into Ventura some times crashes and goes to login, and then reboots, also if I manage to run a cinebench stress, it reboots in less than a minute.
Now the computer boots to login screen, if you log in, shows the system was not properly shutdown and reboots itself.
All of this happened after bios update. Was running fine and doing bench.
EDIT: I've got the same installation with ventura 13.4 that I cloned to upgrade the storage, and it boot fine with the previous settings. Something went really bad on that install
Last edited: