- Joined
- May 11, 2011
- Messages
- 1,143
- Motherboard
- Asrock B365M Phantom Gaming
- CPU
- i5-9600KF
- Graphics
- RX 580
- Mobile Phone
I tried 10.14.5 Beta 2 on a test drive. Netflix no longer works.
Disable IGPU and use only DGPU.
I tried 10.14.5 Beta 2 on a test drive. Netflix no longer works.
Hello, I built my first Hackintosh and wanted to use only the GPU. I've read through everything here and implemented that way. Everything is displayed correctly in the system.
View attachment 398474
View attachment 398475
View attachment 398473
Only I can not export in Final Cut (H264) and the VDADekocerChecker gives the following error message:
An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.
VDADecoderCreate failed. err: -12473
I've made the following settings in Clover:
Graphics: FB name Orinoco, Inject ATI
Clover / Kexts 10:14: Lilu, WhateverGreen, dummy141
The IGPu is disabled in the bios.
Who knows what the problem could be?
orTry it with smbios iMacPro1.1
Only I can not export in Final Cut (H264) and the VDADekocerChecker gives the following error message:
An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.
For your CPU, it's better to use iMac13,2 - it's the closest match.Thank you very much, I was using the SMBIOS iMac 14.2.
2. Change SMBIOS model type to iMacPro1,1. But you will get green glitches in the H.264 output.
3. Keep your SMBIOS as-is and add boot flags: shikigva=32 and shiki-id=Mac-7BA5B2D9E42DDD94.
Both options work. I have the feeling that my processor makes less and not so wildly clocked in the option 2. How do I find out which is better for my Systemperformance?
EDIT: Ok I can see the green Glitches. I think I will use my Option 3 and wait for the Update Thank you very much!
EDIT2: But with the IGPU I can not use HEVC Codec right?
For your CPU, it's better to use iMac13,2 - it's the closest match.
For proper CPU power management, you need to set the right config parameters (XCPM or SSDT.aml) but that's outside the scope of this thread and you should start a separate thread in the desktop section where others will help.
Yes HEVC will work if your IGPU is enabled but you have to use the Dummy141 kext (to enable h/w encode in AMD GPU).