Alienware 17 R3

RehabMan said:

SATA-100-series-unsupported.kext seems to be missing.
EmuVariableUefi-64.efi generally required on Skylake. Also missing.
Patched ACPI may be out of sync with native ACPI.

Click to expand...

OK cool, will give it a go..........

RehabMan said:

EmuVariableUefi-64.efi generally required on Skylake. Also missing.

Click to expand...

Again will also give it a go......

RehabMan said:

Patched ACPI may be out of sync with native ACPI.

Click to expand...

so regenerate and repatch (i don't think we even patched - it was just to omit the USB related SSDT because i had a USB 3.0 stick)?

Bozmantate said:

so regenerate and repatch (i don't think we even patched - it was just to omit the USB related SSDT because i had a USB 3.0 stick)?

Click to expand...

Installer does not generally require patched ACPI.
If a specific SSDT (suspect xh_rvp10) is causing a problem, it can be eliminated with DropTables in config.plist. See my guide plist files, for example.

..............it's as if you breathe fire into the belly of the mountain!

SATA-100-series-unsupported.kext seems to be missing. <--------didn't seem to make any difference

EmuVariableUefi-64.efi generally required on Skylake. Also missing. <------------didn't seem to make any difference

Patched ACPI may be out of sync with native ACPI. <------------------made it work (clover F4 then copy to patched folder excluding SSDT3 which was the xh_rvp10 one and any'x' files)

thank you

will test installer for drives again later (but tried once after including SATA and EMU above and no drives still)

Does it work now?

I ended up going for Sierra and yes it worked except audio but I gave up again due to work.

How about High Sierra?

DcStriker said:

How about High Sierra?

Click to expand...

Yes working fine and running off a 2nd NVMe drive. Audio, WiFi, Ethernet, Battery Status.

I created a fresh installer (RehabMan style - follow his guide to the letter then compare with my clover folder)

i included my Clover folder from the NVMe drive (not the usb installer but it's pretty much the same)

also a script to get audio working (randomly found and it works!)

good luck

Bozmantate said:

Yes working fine and running off a 2nd NVMe drive. Audio, WiFi, Ethernet, Battery Status.

I created a fresh installer (RehabMan style - follow his guide to the letter then compare with my clover folder)

i included my Clover folder from the NVMe drive (not the usb installer but it's pretty much the same)

also a script to get audio working (randomly found and it works!)

good luck

Click to expand...

]

Sweet Ill check it out, Thank you for sharing!
How do you like it? Is it smooth like El Capitan?

Edit
I couldnt get it to boot.
I’ll post my EFI folder tomorrow

I have installed Sierra, have you ran Intel power gadget? GT never goes above .5 ghz. Is that normal?