Contribute
Register

[Success] Skylake Pentium G4400 + MSI H100M Pro-VD

Status
Not open for further replies.
I have the exact same configuration except for the GPU.
I got Sierra to work on it smoothly but cannot seem to get audio working.
I'm a total noob in hackintoshing, any helps?
 
Last edited:
After following this guide, i can never boot into the installation disk, i have the h110m pro motherboard, same cpu, it stops with a stop symbol by clover. please help
 
After following this guide, i can never boot into the installation disk, i have the h110m pro motherboard, same cpu, it stops with a stop symbol by clover. please help

Try putting your FakeSMCKext and NullCPUPowermanagementKext in the 10.12 or Other folder if you're using a new or recent version of clover. In the Clover "Kexts" folders use the last one which is usually Other in recent Clover versions if using Sierra. The 10.11 folder is for El Capitan.

CPUID 0x0106E0 might get you past the Stop Sign as well instead of 0x0306A0.
 
I am trying sierra, i used Unebeast to create the USB, it doesnt boot into the installer, IntelPowerManagement Error and KP.
Try putting your FakeSMCKext and NullCPUPowermanagementKext in the 10.12 or Other folder if you're using a new or recent version of clover. In the Clover "Kexts" folders use the last one which is usually Other in recent Clover versions if using Sierra. The 10.11 folder is for El Capitan.

CPUID 0x0106E0 might get you past the Stop Sign as well instead of 0x0306A0.
 
I am trying sierra, i used Unebeast to create the USB, it doesnt boot into the installer, IntelPowerManagement Error and KP.

Use EFIMounter (use search tab) and mount the EFI partition on unibeast usb. If you are using a real Mac or Hack connect only one HDD or SSD to the system and only the USB unibeast. It will ask you which disk to mount, disk0s1 (Mac or hack drive) and disk1s1. The USB should be disk1s1, if not and there are more choices select the last one or highest number option.

It should show you a folder with EFI (clover boot partition) and nvram.plist. See the Screenshot below the first image (top left) is the Clover EFI boot partition. The second image ( top right) shows Clover folder open. The third image bottom shows the "Kexts" folder where you need to place the FakeSMCKext, and Nullcpupowermanagementkext.

FakeSMC Other folder.png


Download: EFIMounter, Clover Configurator, FakeSMCKext, NullCPUpowermangementKext. Google Clover Configurator the rest you can get here at tonymacx86 in Downloads section.

Try this first and at the clover boot screen use your arrow keys (right) and select options. Open ACPI and uncheck everything so you have no fixes. Binaries select CPUID 0x0306A0, or 0x0106E0. In graphics set Intel fake ID to 0x19120003, and set ig to 0a206080, and uncheck the Inject Intel box. CPU tuning uncheck Halt enabler, c state and p states. This is a Skylake CPU you have right?

After making these settings and returning to the clover main menu hit the space bar once, select verbose, return and boot up. catch a picture of the error message you get and post it.
 
Status
Not open for further replies.
Back
Top