Recent content by Zarkstar

The guide on Dortania have some typos, so following it perfectly may result in a non-working hackintosh. When I switched to OpenCore I found that there wes something wrong on some documents. Have a look at this post of mine and see if that can help!

I did a fresh install and followed the guide again, now my system is working reliably. If I remember correctly, I solved my problems thanks to a guy on ****** which gave me this table. It turns out the guide on dortania is not 100% correct and the iGPU configuration indicated there is not...

Here is a specific guide for the conversion. Main problem if you don't do a fresh install is that while OpenCore puts everything it needs into the EFI, Clover puts stuff here and there and you have to clear everything or something will mess up. That guide should help you with that. I didn't have...

That is a different laptop than the one discussed here, so most of the things here probably won't help you. You didn't even write what problem you're having now. I would suggest you to start reading from here. Read everything, then follow that as a tutorial. If you encounter problems then post...

Quick question: do you have issues with HDMI over USBC? I can' find a way to output 4k 60fps, but I'm not sure where the limitation is. SwitchResX doesn't list it as available (max I can find is 1080p60Hz). The adapter is the official apple one and the cable is HDMI 2.1, so this should not be an...

Ver Very nice to know. Maybe under my tree in the future. Quick unrelated question, have anyone tried to lower the base frequency in LFM, and if yes what was the impact on thermal/performance? I'm trying to understand if I should be dedicate time to this or to undervolting. I've tried with...

Yep, OC documentation is way better than Clover's, but still quite a mess sometimes. Btw, as I can't find any reference, did you manage to get Handoff working? Mine kinda works, meaning that sometimes it does what it should, but most of the times it fails (ex. Safari showing in the dock but then...

I solved it, mainly thanks to another forum user. My main problem was the iGPU configuration. I changed AAPL,ig-platformid value and the device-id in order to match the Intel Iris Plus 640 and it worked! This table is not for some reason listed in the main guide and the values reported for Kaby...

I tried and I can boot in Recovery without any issue with my EFI and with yours. I proceeded repairing the disk. If I try to boot with your EFI as-is I experience the same problem. I've tried deleting the 2 CPUFriend kexts and i removed the entries under Kernel->add in config.plist, but the...

After a month of trials and fails, I'm trying from scratch with a new installation with open core since I wanted to try Big Sur out. Since the documentation seemed way more comprehensible, I thought I could give it a try. I've followed the guide on dortania and I'm now able to get to the Welcome...

Hi @jkbuha as I see you have way more experience on hackintoshing than me, maybe you know how to address my issue. I'm trying to install Big Sur from scratch on my XPS13 (although mine is the kebylake model with an i7 7560U). I've followed the guide on dortania and I'm now able to get to the...

I tired, nothing changed unfortunately. I've also tried following Rehabman guide to patch HDMI audio, as Laptop FAQ suggests that can cause a reboot issue connecting HDMI. I think I've followed the steps correctly, but nothing changed. The laptop still reboots as soon as I connect the HDMI...

So, first of all, thanks again. I've tried as you suggested me: i've removed OsxAptioFix3Drv, I removed SortedOrder, i removed all the unnecessary boot arguments. The system still boots Ok, but the inconveniences are still there. WiFi still takes a lot of time to initiate (and I've noticed...

There was no issue showed in verbose mode. macOS completed the boot, showed the animation of the apple logo with the loadingcompleting and then the screen turned black. I've tried using the old EFI/Clover/Kext/Other folder and I was able to boot with no problem. SO my current situation is that...

thank you, I followed your suggestion: I’ve deleted the kexts that gave errors and moved them to EFI, then checked with hackintool, downloaded the updated ones and replaced them. Problem, the laptop now shows a black screen after the Apple logo. I guess I messed up something with some video...