Recent content by victoroni

@CaseySJ , Yes it is all from the same test machine still. Done. Here's the IOReg file with both ssdt's enabled. Doing so has fixed the Thunderbolt hot plug in the motherboard ports. I've noticed occasionally on booting that the GC Titan ridge card won't recognize the Lynx cards in the...

Thanks for the reply. Unfortunately I've never done this before and am a bit green when it comes to hackintoshing, so the easiest thing for me to do is follow Casey's guides which have led to success so far. I believe the new HackinDrom SSDT I made is pointing back to RP21 and that is what fixed...

https://www.tonymacx86.com/threads/gigabyte-z490-vision-d-thunderbolt-3-i5-10400-amd-rx-580.298642/post-2278416 Hi Casey, Back and trying to get Hot Plug to work on a flashed GC Titan Ridge card. I followed the above guide using Titan Ridge controller on Hackindrom to generate my SSDT, and no...

Wow that's wild, thanks for verifying! Guess I don't suck! ha The board must have been defective or must have been flashed/damaged by the original purchaser. Is it possible to flash it back to the original OEM firmware, assuming I don't have a copy? When u say thunderbolt subsystem is that a...

Hey thanks for taking a look! I believe I did, i just followed the procedure in your flashing guide, but that part was a little confusing to me as i wasn't sure what each line was doing specificially. I ended up with 4 .bin files attached them here. Correct, no Thunderbolt devices are...

Hello Casey, Apologies in advance for the novel. Hoping someone can help me at this point I'm banging my head against the wall. After following the guide, I was easily able to get everything working that should be working, except for Thunderbolt. Originally I was in bios F7c, which I saw can...

Hello, can you confirm if the Thunderbolt 3 ports/devices are functional in this build? I cant seem to find the z490 Vision D anywhere and this motherboard is beautiful. I'm building an audio workstation and need Thunderbolt 3 ports to work, although thunderbolt 4 i'm sure i could live without...

Hi Toleda, Apologies for the delay. Removed the aforementioned kext, and attached new files.

Hello, I'm at my wits end. I appreciate any help! -___- Description of audio problem: At first my audio devices showed up, but had no sound and ALL media players would be stuck at 0:00, including videos youtube/VLC/quicktime they just wouldn't load/play. I ran through the steps again, and...

Hi there, I'm thinking of building a system with this motherboard and cpu. Just wondering if everything else is functional/stable so far. I'm building for someone else, who likely won't be able to resolve issues. I see that h370 was just added to the buyers guide so i'm thinking of going...

Hey thanks for stopping by guys. My original plan was to upgrade my hackintosh. Then I got the Mac Pro, I just figured that it being a 2008 model A1186, that it probably wouldn't be up to par as far as upgrade capability, like Sata III speeds for multiple Hard Drives. Maybe I was wrong? I...

Hello all, I thought I'd post here to get some feedback. I came here because I'm currently running this setup that i built about 5 years ago, and my boot times and overall performance have felt sluggish as of late: -GA-x58a-ud3r rev 2.0 on the FH DSDT i believe -i7-960 with a Thermaltake...

yeah its all good, I'll do a fresh install.

Tried that as well, still nothing...

Just move it to the trash? Isn't that what I did originally? I removed the other one from IONetworkingfamily.kext/contents/plugins Anything I should do before restart? Repair permissions with kext utility?