Recent content by SSmongere

Forgot to update system pref on profile. Sorry.

I have tried everything I can think of to get the USB and Audio to work on my new build with a H370M-DS3H and i5-8400. I have also tried to find the issues that I am having on this site but I can't find any with my problems. The symptoms are as follows: The audio works but If i plug into the...

I have tried every workaround for about 2 days to get the onboard graphics to work right on my build and not show 7 mb of memory. The list of trial and error is long, but I'll try and sum them up here. I have tried multiple SMBIOS's: 14,1/ 14,2/ 17,1/ 18,1 and 18,2 with no prevail. I've tried...

trs96 I have looked at your post about the HP 6300 Pro SFF and it seems to be the best bet right now because of strapped funds. I have some questions about this configuration. I will try using a EVGA GT 710 graphics on this build is there any steps different to make the card work than the guide...

Yosemite install via Unibeast 5.2.0 failed this afternoon. I tried it first with out the -v command and it would only load 1/4 of a bar then quit moving left it for 10 min and it would not wake up from a black screen. Tried again with -v command and it quit in after the exact same post line the...

trs96 I was wondering if it would be better to go and try and install Yosemite with chimera via Unibeast 5.2.0 and see if that takes since Sierra is not working out with clover? I am already using Yosemite on my old mac pro so their is no issues with using that version of the OS. I'm already...

I'm remaking the drive as Legacy right now for this is the 4th time I have made the drive UEFI. 2 times were unaltered and 2 times altered so I'll try Legacy to see if it goes through. If not I guess it is a lost cause.

The thumb drive is a USB 2.0 and is a PNY drive. Should i try and make the installer under Legacy instead of UEFI? Maybe it will have better luck.

I have enabled Legacy USB, and disabled XMP Profile 1 and still it freezes in the same spot as all the other times with no change. I really can't tell if the drive is a USB 2.0 or 3.0 to answer your question. I am out of options unless it is a processor issue because mac never used a i3-4350 in...

Was that the only issue out of the only issue out of the 16 pictures uploaded for the BIOS? I tried to get all setting found in the BIOS the even could be hidden. It might be better to see what settings worked on your board and then let me try them on this one to see if it will get me some...

Forgot to include in the above post that XMP Profile has been turned off before in one of my tests and it did nothing. So I left it on. This install is a fresh one on a HDD that has never had OS X at all on it not an update that has already had a running system on it. The HDD has been formatted...

Here is the photos you requested.

I have tried that with no luck. The new memory came with 2 8 gig sticks and I have tried both separately with only one in ports 1 then going to each and every other memory port restarting every time the post freeze. I have not been using them together so only 1 8gig stick has been used. None of...

I received the new memory today which is G.Skill F3-1600C9D-16GXM the BIOS recolonizes the memory and both sticks work according to the BIOS. I tried to boot my old EFI file with the new memory to see if it would go through with no luck it froze in the same spot half way through the posts. I...

cmn699 I have uploaded the EFI compressed file you asked for in post #10 could you give it a gander and see if everything looks good in it. If you need anything else on my side please message. I'll have to wait until my memory sticks come in in order to see if this fixes some of the issues since...