Recent content by SpinRD

  1. SpinRD

    << Solved >> Updating Monty 12.4 to 12.6.3 issues

    Hi all, Not that I got any responses to my plight at the time, I thought I should at least update the thread to show that it has been solved. In the end I managed to solve my issue which related to the fact that Monterey was booting using an old version of OC that related to my Catalina build...
  2. SpinRD

    << Solved >> Updating Monty 12.4 to 12.6.3 issues

    Hi there, I created a successful boot of the Monterey install and it loads up and works beautifully in version 12.4 i decided to upgrade to 12.6.3 and ran the download/install process. It runs through the whole process with no problems except that it doesn't actually install the update? It...
  3. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Success, I have managed to get them both working. I went back and got a pre build OC0.7.8 (should have done this sooner). I am now able to have both the Apogee and Apollo running together. Thank you @CaseySJ. The only issue I have remaining is that the little headphone DAC that I have, doesn't...
  4. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Totally agree as this is a lifesaver! Learnt this at a very early stage when I (eventually) discovered that I had a bad stick of RAM Yes, they will appear if one is plugged in independently. If they are both both plugged in, then the Apollo is the priority. I've run IORegistry and no the...
  5. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    So this morning I went to do as you stated, and I notice that in the boot picker it says OC Release 082 with the date. I fear that somewhere along the lines I might have moved the new EFI into the Catalina one by mistake. This may explain why when I compared a backup version with the one I...
  6. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Thanks, I thought so too until I just restarted my computer and I am having the same issues now in Catalina only with the Apogee. I have been comparing EFI and noticed that my EFI for some reason is now 0.8.2 for Catalina as well. It also has appeared to change my mac from a 19,1 to 20,1. I was...
  7. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Hi all, I have had a very stable build using Catalina, now has come the time where I am now wanting to upgrade to Monterey as I think it has somewhat settled down now. I have built the new Monterey 12.4 system onto a brand new SSD using OC 0.8.2 as that is latest one available. The build and...
  8. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    **Update on random crashes** Before performing the stress test, I set the BIOS (VCORE, LLC as suggested) I have since as recommended performed a stress test in Windows (bearing in mind my CPU is not overclocked or anything). Upon downloading and looking into it, I thought I would run a quick 5...
  9. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Thank you for this, I think off the top of my head this is set to auto. Looks like I need to get it set to low. The work load I put on this is not heavy as it’s audio, but I occasionally might render a small video tutorials which can range from 5 minutes to 45 minutes with basic edits. It’s by...
  10. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    This is great, I do have a Windows boot drive already installed. I can definitely have a look at trying this out over the week. It’s going to a be a couple of days before I get a chance now to do this. Incidentally, I haven’t even begun to consider over-clocking as it’s powerful enough for what...
  11. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    I’m gradually installing bits and it’s been okay so far. Are there any settings in the Bios that addresses temperature, just because when it crashes the fans run up. Could this be a sign of temperature? I do run a heater in my room to keep warm (not sweltering, 20degrees) but I just wonder if it...
  12. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    After leaving my hack on all day, it didn't crash and came home to it still with the screen saver on. Clicked on it, logged and opened it all up, no problem. Based on the fact it had been on all day, I decided to download Pro Tools to see what would happen. That downloaded and installed and...
  13. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    This is correct... the thing I find most puzzling, is trying to figure what is all of a sudden causing these issues? I built my Hack back in August and it has run beautifully, with no issues (OC 0.6.0/ OS10.15.6). Then in the last fortnight or so, it has become unstable. It would sometimes...
  14. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    Hi Casey I am having all sorts of problems, I fortunately backed up my original system drive and reinstalled a new one but I am still getting random freezes while trying to do basic installation of things. Is it possible that the RAM could be an issue?
  15. SpinRD

    Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

    I appreciate the fact you have given a sermon.. its a hard and fast lesson to learn. I've got an M.2 caddy as well coming, so I should be good to create the new OS Drive from this and then boot from this if the current OS sees this in the sys pref/start up? Then I will definitely be creating...
Back
Top