Recent content by simon1990

Thank you! I followed your instructions for 10.11.1 and my usb3 work perfectly. I had to install your injector to obtain all ports to work on my Gigabyte h97-d3h.

I have a Gigabyte GA-H97-D3H and this fix worked for me, thanks!

sorry, it was a old ioreg (two days ago)....this one is the correct

Here you are

https://insanelydeepak.files.wordpress.com/2015/03/clover1.png I wrote "0x1e31" in XHCI field to change PCI properties DeviceID and VendorID. "Inject" isn't the right word

If I plug USB3 devices in the USB3 port without inject Intel XHCI, the USB3 port doesn't mount USB3 devices

I fixed the USB 3.0 problem. I deleted PXHCD.kext, then I installed FakePCIID.kext and FakePCIID_XHCIMux.kext but with them I could only mount hard-drive from USB 2.0, USB 3.0 didn't want to mount hard-drive. So I opened Clover configurator and I injected the Intel device-id 0x1e31 in...

ooooook, I'll try later!

If I don't install PXHCD.kext or GenericUSBXHCI.kext, all USB ports (three 2.0 and one 3.0) don't work, they don't mount hard-drive or pen-drive. An AppleUSBXHCI.kext problem related to my laptop? Unfortunately my VAIO's bios is locked.....Maybe editing the kext should be useful

ok. In the following days I'll receive a supported WiFi card, so I'll fix it. About USB3.....I tried to use OS-X-Generic-USB3 but I had problem with USB3 hard-drive, the laptop didn't want to mount them.... Probably you have the solution :)

ok, i'll try and report on What do you think about the setting of my laptop? In general, do you see wrong things or mistakes in the files' contents attached two post ago?

ok. So it's difficult to understand the problem that occur after wake up.

ok, I hope to get it right

ok, it worked. Now I'll modify the cpu model etc....

Hi all, I have a problem with my Sony Vaio SVE1512X1ESI (HM76 chipset, ivy-bridge cpu and HD4000 mobile graphic card only, there aren't other graphic card). I successfully enabled display brigthness control following this guide...