I will certainly try that then! Thank you
I'm pretty sure it's a Titan Ridge controller. It's listed as a 15eb Controller device in the Device Manager in windows.
https://devicehunt.com/view/type/pci/vendor/8086/device/15EB
I don't have direct access to the motherboard right now, as I sent it...
I am pretty happy with the V2.0 actually, with the exception of it not recognizing my PCIe expansion chassis (with UAD cards) on initial boot (hotplugging is no problem). I've used it on an ASUS Prime-A x299 motherboard and also tried it on the Prime Deluxe II x299 motherboard. On the latter I...
A quick question about flashing a GC Titan Ridge card.
I have successfully flashed a V2.0 card a while ago with the NVM50 firmware.
I then bought another that was a V1.0 however.
After doing the driver update in Windows and checking it, it seems it was also updated to NVM50. The V2.0 and...
I can’t help you directly, as I’ve never used that interface, but if you do a search for Antelope in the forum, I believe there are many issues with getting them to run via thunderbolt on hackintoshes unfortunately. Other interfaces (UAD, Presonus etc. ) don’t seem to have many issues.
Thanks for following up on this @dez ... I think I missed the notification on this!
So I have been in touch with ASUS tech support and am just in the process of getting my board RMA'd. Went too and fro with them about the issues, but they agree something seems off. They did not recommend or...
Thanks @dez!
I have since run a few more tests and figured out that hot-plug only seems to be working on Port 1 for Thunderbolt devices in Windows 10 as well. Behaviour for Port 2 (closest to PCIe slots) is similar to the USB-C in that it only works when cold booted but if device is removed...
Firstly, thank you to all the contributors to this arena!! I'm kind of one of the lurkers and have spent a great deal of time gleaning all sorts of information together from the many different forums. And I'm sure there are many of us, but I wanted to mention how much I appreciate all the work...
Thanks! Yes I did see that. By 'cloning an install' it would mean installing Mojave on a different system and then imaging the OS drive and copying that over without any alteration, do I understand that correctly?
I am still curious to see if anyone has had any experience on the X299 board with...
I've been searching for information on whether I could still run macOS Mojave on a 10th Gen build. I need Mojave for software compatibility (Audio)
Haven't built one in a while and catching up a little! So thanks in advance for your advice.
I've researched two options.
1. A Z490 build ...
Thank you for the info!! I tried a later version of clover before but ran into more problems as it wouldn't boot properly, so I rolled it back again.
Will try again once I have GPU working properly.
Last time I tried Hackintoshing was back in the Chameleon days with 10.4-10.5 I think! So forgive me if I'm a little behind on a lot of things ... Been catching up on here and thank you to all of you who have contributed! Much appreciated.
So I've managed to get Mojave running somewhat on this...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.