Recent content by MichaelW

Okay, so... I'm attaching my working Clover and Your OC just with added SMBIOS. I kept it populated, will be changing it for live install. Interestingly today I don't have NVRAM issue, but kernel panic still persists. From this starting point I did in iterations (between each iteration I...

Did NVRAM clear in Clover, F11 and then reboot. After disabling SecureBootModel in your OC build I run Reset NVram and also clear, both with reboots, same result. After that disconnected all the drives and tried just with USB stick as only medium, again reset NVRAM (from your OC tools), so...

Initially putting SN and the other ID for correct iMac 19,1 i think it was(I'm on different machine right now), nothing else, only after that didn't work I started to play around. I kept everything else original as you uploaded it just to test whether I can get into install which shuold not be...

Hi @Edhawk, I tried your opencore config with Ventura main release (just added SMBIOS). I have Asus z370-P, 8600k, RX580. I removed all the drives except the usb stick to rule out conflicts with older installation based on Clover. Did bios reset and setup, clear cmos, nvram, but got: OC: Failed...

@SmallPooP I had over 500k files in Dropbox and after removing them out, system is more stable. I don't know what caused the crashes, if it was stress to SSD or CPU (Dropbox was almost nonstop consuming 70-130% CPU and continuous checking of files wrote 10gb/hr to drive + some gbs of read)...

Something new happend today, I got no display output. After reboot and few minutes of work I got this cursor and needed to reboot again. Updated debug dump in attachment. I wasn't doing anything graphics demanding, just editing text in text editor (Atom).

Hi all, this is an issue from the begining, but after updating to 10.14.5 this issue occurs more often, sometimes 3/4 times per day. Sometimes my mac hang out with artefacts behind cursor. It happens anytime, even when I am not at computer at night. It looks like photo in the attachment but...

Hi @VladislavHD, this looks like a viable option, Ill try it, thank you. So far I have disabled automatic backups and run it only when I leave office, but this will be much better :)

Hello, I have few internal drives: 1x 512GB NVMe SSD for MacOS, apps, docs, etc... (enabled for TM, disabled some locations) 1x 2TB STATA HDD for data archive or larger data (disabled for TM) 1x 1TB SATA HDD for Time Machine 1x 120GB SATA SSD for Windows (disabled for TM) 1x 1TB SATA HDD for...

I have tried SK (which is my home country and current setting) and EU, same result. Yesterday I moved PC little bit, rotated antenas in different angle and it's working better now most of the time.

Suggestion from another user with similar problems. I'll try exact country code, could this be causing the issue? I have looked up our wifi, it has not set the country code and it has no option to set it. Which country code should I use than?

At first I didn't know what you mean by port address. (Later I figured out it was first number in ports curly brackets), now is everything working correctly, thank you.

Hello, I have PCI-E card with BCM94360CD (https://www.ebay.com/itm/Broadcom-BCM94360CD-802-11ac-1750Mbps-Desktop-PCi-E-WiFi-Adapter-Hackintosh-BT/132303186559?epid=1179343993&hash=item1ecde26a7f:g:eek:xUAAOSwNZtZ2aOg:rk:1:pf:0&LH_ItemCondition=1000&LH_BIN=1) Both WiFi and BT are working, even...

Hello @RehabMan, first of all, thank you for great tutorial. I have managed for all of my USB ports to work with USB3 devices, but they are only working on USB2 speeds. I think I have correct setup, device is identified on port SS, not HS and also macOS System report is showing max speed Up to...