Wow, you guys are AWESOME.
Getting into the BIOS, noticed that I don't have any fancy CSM option on it.
After a little research, found out CSM is for legacy support.
I changed all UEFI only option in BIOS.
Voila.
Works great so far!!!!! I changed nothing but BIOS. still Lilu+WEG in /L/E.
Very...
Thanks a lot, Gigamaxx.
I'm not that stupid. I know where to connect to monitors.
And, I wrote, I installed lilu+weg. This is the reason I started this post, and still frustrated.
Thanks again,
CSM on bios really matters? Let me try it as well.
HDMI is the same result. just black.
When I use iMacPro 1,1 SMBIOS, of course, I turned off IGPU in the bios.
Please help out.
Thanks a lot for the advise. Let me try this as soon as possible which would be on Sunday. I will reply it with a result. Hope it will fix it.
But, with HDMI, it will be the same resolution/frequency like DP??
Outside?? I INSTALLED Lilu+WEG in /L/E folder.
For the SMbios, I tried iMac14,2 iMac15,1 MacPro 5,1 MacPro 6,1 iMacPro 1,1
Only iMac14,2 is working smoothly other than the 3rd DP. The other ones are working but there's some glitch on the graphics.
Thanks a lot for your help.
I did like this. I have 3 identical DP monitors.
1. all connected 3 DP. only the third ports doesn't work. Recognized in the os. the third monitor shows black.
2. all connected 3 DP. change the order of the ports. only the third ports doesn't work. Recognized in the...
I installed Lilu+WEG in /L/E folder. Only 2 DP is working when 3 DP connected. Tried to change ports between DPs. Found out only that specific DP port is NOT working. macOS recognized all displays. Mouse is going into that monitor, but not showing anything. Thanks a lot.
Anybody use 3 DP output displays with RX580?
What brand's RX580 supports 3 DP display with Mojave?
I connected to 3 DP monitors to my XFX RX580, only 2 working. So frustrating.
Please help me out.
I know that, but I saw some reply mentioning that KP on 10.6.8 with HD PCIe card.
Anyway, it has to be HD3?
My board(ga-p67a-ud4-b3) has 2 PCI ports. If I had HD2 PCI, I could have tested it at least...
I'm sorry for that but mine is working perfectly on the same board.
Did you try installing both lynx2mac and realtek official driver inside multibeast?
I don't remember exactly but one of them should work. Mine did. Good luck.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.