Recent content by hawk2212

  1. hawk2212

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    As for me, I am not facing this issues
  2. hawk2212

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    probably you should try different layout-id
  3. hawk2212

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    correct Yes, but check your original DSDT, that it matches my SSDT If you mean startup chime, then no. AudioDxe.efi can be safely removed I've removed devices from this config, so that it doesn't confuse when setup on similar hardware This should be added for sound to work...
  4. hawk2212

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    Sure This can be fixed with SSDT patch
  5. hawk2212

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    Cam will most likely work without any additional effort. For sound and mic just use `AppleALC` and correct layout.
  6. hawk2212

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    forget about card reader, 99% it won't work. Everything other should be just fine
  7. hawk2212

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    You can use the same smbios as in the original guide, if it worked for you before
  8. hawk2212

    Installation Stuck > acpi error pci0?

    It's working. Something is wrong with your setup
  9. hawk2212

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    From my experience - almost nothing. In order to get a well working OpenCore hackintosh, you need to setup it carefully, especially when it comes to ACPI tables. For laptops, a lot of SSDT patching should be done. I used original rehabman clover setup only as a reference.
  10. hawk2212

    Huananzhi X99 Xeon E5-2680v4, can't boot USB install

    Consider using OpenCore instead of Clover
  11. hawk2212

    Clover r5126 fails to boot

    As I see, you have completely different motherboard. My setup may not suit your build I suppose
  12. hawk2212

    Clover r5126 fails to boot

    The last stable version of Clover is 5119, but it will work only with Catalina and below. Current Clover is buggy rubbish and it is almost dead. Don't waste your time on it, just move to OpenCore setup.
  13. hawk2212

    << Solved >> OpenCore battery patch

    Sure, take a look
Back
Top