Recent content by DeCruelz

Ok problem solved. Booted using the Recovery drive and oddly I was able to erase using Extended (Journaled, Encrypted). Performance took a major hit though. This struck me as odd as Journaled just kept failing and Mojave's Disk Utility is just f*cked. Fortunately I had an old USB drive with the...

Ok noted! Still trying to find a solution to erase the array. I have tried erasing it with Disk Utility and via Terminal, tried to force unMount, using sudo, etc but no luck so far :(

Hey guys, I am having issues trying to Erase a newly created raid array with 3X10TB drives with Extended (Journaled). I previously thought it was due to the block size as I initially had the array set to 4K block size. I subsequently recreated the array with 64bit LBA. Both arrays were detected...

Do you have the NC360T running in bond or link aggregation mode? If so, has it been stable for you?

Hey VioletDragon, thanks for your reply! Out of curiosity which NIC are you using? I actually have 3 NICs altogether. I have the HP NC360T, Intel Pro 1000 PT Quad and a rebranded HP Quad, all of which use the same 82571EB chip. I have tried all variants of hnak's kexts but they don't work with...

Never really used much of Linux before but after some reading, I figured out what grep is used for. Turns out it was the grep Ethernet parameter which was my issue before as the Subsystem line did not have 'Ethernet' in it. Anyway, I have another Intel 4 port NIC and I was able to successfully...

Hey guys, I might need some help with this as well. When I ran lspci I got the following instead: 07:00.0 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller [8086:105e] (rev 06) 07:00.1 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet...

I would try following this guide here: https://www.tonymacx86.com/threads/unibeast-install-macos-sierra-on-any-supported-intel-based-pc.200564/ Create the bootable USB drive using UniBeast. Once installed, use MultiBeast to set the appropriate kexts, etc.

Thank you so much for this Brebo! That actually makes a lot of sense, since the card is really old now. I'll switch to using onboard graphics for now and that should resolve the issue. Thanks again! EDIT: Set onboard graphics to Enable in BIOS, removed the 8600GT and connected DVI to onboard...

Hey guys, I have a working Mavericks install but decided to perform a clean upgrade to Sierra. I created the Unibeast USB as per guide and opted to inject the NVIDIA option. Double checked all BIOS options. I can still load my current Mavericks setup. Added -x -v and tried with cpus=1...