Recent content by ckat

i was able to use unibeast to update my rev 2.0 FH bios GA-x58A-UD3R without too much of a problem. then i tried using the clover to yosemite guide which was a little confusing for legacy.... here is what i did: from what i could figure, these should be the legacy settings - guide is a...

hey all. so i've been having tons of kernal panics. i replaced the ioahcifamily and appleAHCIPort kexts to ones from 10.8.0 ioahcifamily version 2.2.0 and appleAHCIPort version 2.4.0. i repair permissions, and flush the cache, and things seem to start up fine. however, if i reboot...

Hey all. I've been using istat pro too monitor CPU temps. Ever since I upgraded from 10.6.8 to mountain lion I only can monitor harddrive temps. I'm currently at 10.8.1 Any thoughts on this? Hardware specs in my signature. Thanks!

audio works on my build. now having problems with usb 3.0. previously worked, however i had to reformat ssd drive, restored from image created by superduper. reran multibeast 5.02 and everything seems to be working except usb 3.0. reran multibeast again to install usb 3.0, and still...

def could be. recommended drive is the sony optiarc. unfortunately that's what i have, and i still have this issue.

i have same issue. everything works fine, i burn a dvd using toast 9, 10, and 11 then the eject button stops working. same if i eject the drive from desktop, or from disk utility. this was happening in 10.6.8 and now in 10.8. system config in signature.

i posted screenshots on my thread of what i used for multibeast after install. got things workign properly. i haven't tried sleep yet. i have the FB version, but shouldn't be too different...

the dsdt from the tonymac database. motherboard GA X-58 UD3R rev 2 bios FB

here are my multibeast settings.... see pix i didn't enable trim support, but probably should have. not sure bout the rev 1 board, but i'd say likely.

yay got Mountain Lion working on my customac. thanks tony and macman! had to boot into safe mode -x and then the installer worked! ran multibeast after the next reboot and everything seems to be working. will have to test sleep soon. system config in my signature.

Thanks for the reply. I actually haven't set it back to the base bclk. Sleeps not that a big deal for me. Every real mac I've had sleep will stop working after awhile so not having it is not amy real loss

i have the batmobile gigabyte 5770, same as macman. dual dvi ports work. the hdmi port is mirrored for me, and the system doesn't recognize the monitor/tv when a monitor is connected to the hdmi. i use dvi port to one monitor. tv is connected via dvi to hdmi adaptor and then hdmi cable...

i have a sony optiarc and an asus which makes pioneer drives. i'll try with discs in them to see if that works.

hmm, good point. i wonder if air video server can be the cause. not using any t*****t apps currently. will investigate other apps.

weird. i saw your post from a few weeks ago regarding your sleep issues. yah sounds like we have similar issues. it's really not the biggest deal, as all of my previous APPLE branded computers always ran into sleep issues. however, it's one of those things that if i can get working it'd be...