Recent content by bishyb

Nice topic :) Of the really really old boards I've owned would be either an Epox Socket A or DFI Socket 939 motherboard from back in the day: Best motherboard I ever owned was an Abit IP35 board, which at the time clocked better than my X38 board from what I can remember...

Apologies if this has been asked already, can you change the port that works with HDMI audio on motherboards with 2 HDMI ports? Currently HDMI audio only works on device connected to port 1, but port 2 nothing. Thanks. (Gigabyte H77N-WIFI, using the dsdt from tonymac database)

Cheers RehabMan, that's miles better :) Managed to get audio working too, patched ALC269 kext and DTGP/IRQ/Audio Layout (28) dsdt patches :) Battery/Sleep next...

Graphics now working :D Cheers RehabMan, great work with the MaciASL patches repo, really helpful! Not having much luck finding the trackpad brand/model on the Acer website though, does this help? (https://dl.dropboxusercontent.com/u/12143154/ioreg.png) Now time to read up on AppleHDA...

Righty, so here's where I'm at with installing 10.9: Firstly, my spec is i3-2367M / HM77 / Bios 1.09. Unibeast 10.9 Install (Laptop Support + Legacy USB Support), needs -v -x flags to boot into installer. (Really temperamental, worked first time fine then not other times...) First time...

1366x768, 6-series, i3. Cheers RehabMan, changed to ACPI 4.0, then used patches 'Replace Names' and 'Fix TNOT Error' and now at: What should I try next?

So did anyone manage to get Mavericks running on this? Picked up a V5-171 last night, not having much luck with it since it's a Sandy Bridge HD3000 model and seems everyone in this thread so far using HD4000 systems instead, so will need to create my own dsdt. No idea where to start with...

Cheers Weishauptus, appreciate the reply :) Yeah new Macbook would be nice, but my 2008 Macbook Pro died recently and slightly put off my the awful support from Apple when inquiring about repairing it (basically "just buy a new one..."). And also the ideal 8GB/256GB Macbook Pro config is...

Did you eventually manage to get OSX running properly on the E330 in the end Weishauptus?

Same for me jmpa, about 3 seconds for my usb devices to wake before can start typing etc.

Cheers Alexouille that did the trick :D

Hmm, for some reason I thought the top port was a Displayport port instead of an HDMI port, will go try that instead then cheers :)

Ah nice one. Strange how my setup worked great first time (including HDMI audio on the tv), then not on restart :( Gonna try a DVI>HDMI cable to the monitor next, see if that makes any difference...

Anyone successfully running both DVI/HDMI at the same time? Really annoyed, had everything setup nice and working perfect with just DVI. Plugged in HDMI to test running XBMC outputting to TV, and worked fine first time (TV was secondary display and both working at the same time). Restarted...

Fraise. :D