I have the same motherboard with you and previously I also have the i9-9820X CPU. However, it failed to boot, and stuck at the system loading screen. There is a discussion here and there are also others reporting about the problem of i9-9820X in kgp's X299 thread. I am not sure with the current...
I am just starting to dig into the world of the hackintosh, then I see your guides and advice, which are really helpful to me and probably to the whole hackintosh community. I really appreciate your help of solving the problems of my ASUS PX299D2 system and your patience to try to help every...
TB hotplug is still not available, I tried to connect a TB SSD and even with an eGPU enclosure with a M.2 SSD with pcie adapter in it, both devices will show up at boot, but will not show after replugging.
In the IOREG, though the TB devices are listed, and will turn red when disconnected, but...
Do you mean waking up from sleep? Because my keyboard and mouse is not using bluetooth from the broadcom card, but from another USB receiver included with the Logitech keyboard and mouse, so I guess the problem is not with this card.
There is only one 1GB LAN port (Intel® I219V, 1 x Gigabit LAN), the other one is the unworking Aquantia AQC111C 5G LAN.
Yes, I am using BCM943602CS BT/Wifi controller on one of the M.2 slots, and it is the one that relates with PCI0.RP09.
I bought this thing on Taobao. It works fine with my...
1. With 3 USB port limit patches for 10.14.3 enabled, USB kext with HS09(9)&HS10(9) implemented and "Alpine Ridge XHCI WA" disabled, the USB-C SSD appears under HS09&HS10 with USB2.0 speed.
The USB-C hotplug is available now. It seems that my previous USB-C SSD is malfunctioning so that it can't...
I am sorry that I could not report back immediately since the hackintosh is in my office and I am not with it to test when you replied, but I will always report back as soon as I can!!!
To conclude your replies, I also want to make sure what to test when I return to my office:
1. With the...
1. Oh...my fault, I misplaced the kext for the i9-9820X to the i9-9940X EFI folder!!! Thank you for pointing out my stupid mistake.
2. Currently, I do not have this issue, because whenever my system goes to deep sleep, it will automatically wake up...
@kgp
I am now using the latest EFI folder in #1,735, and the TB settings you mentioned in BIOS are all disabled.
HS09 & HS10 are now gone in IOreg (probably because the USB kext does not implement HS09&10 in it?)
But both TB and USB-C hotplug still do not work, the TB SSD partition now takes...
@kgp Yor are right!!! After I removed the lines in the SSDT-X299-XHC.aml or totally removed SSDT-X299-XHC.aml from the patched folder, the PCI list in system report correctly shows the GC-Titan Ridge TB 3 NHI information (screenshot A). But USB-C information only shows when there is a USB-C...
Yes, I did put SSDT-DTPG.aml and the SSDT-X299-TB3HP.aml you attached into the patched folder in the ACPI folder (as shown in the pictures attached), here are the results of trying your advice.
@kgp This one is the ioreg with TB SSDT in the patched folder, please take a look, thanks.
However, the PCI information still does not show the onboard TB controller and hotplug is not available.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.