Recent content by ascianabhro

removing

I have installed Mavericks and Win 8 successfully using clover following the guides posted in the laptop forum, mounted EFI partition using clover cnfig and everything working as expected, can see Mac and Win 8 at clover boot screen, so far only issues are the HD4000 Vram shows 1 GB which is...

Rehabman, installed Mavericks and Win 8 following the guide, mounted EFI partition and all working good, only glitch is the battery status stuck at 95%, HWMonitor reports the same. I see on the Mavericks Probook clover guide to remove EmuVariableUefi-64.efi. I dont see that file inside...

rehabman, can you point me to the post which explains duel boot partitioning scheme for Mavericks Clover and Win 8 UEFI on same HD, can I make more than 4 partition on the hard drive

booted with unibeast/mavericks USB and created 2 partitions, formated journal for mavericks and fat32 for windows 8, then installed mavericks and ran probook installer with chameleon and was able to boot into mavericks, noticed that there is a 200 mb partition automatically created, then booted...

I installed Mavericks and Windows 8 successfully on a ProBook 4540S following the guide, selected legacy boot on BIOS and partitioned the hard drive as instructed, Mavericks created a 200 MP partition and Windows 8 created a 350 MB partition apart from the 2 regular partition I created for Win 8...

[Guide] Dual Booting Mavericks and Windows 8 I installed Mavericks and Windows 8 successfully on a ProBook 4540S following the guide, selected legacy boot on BIOS and partitioned the hard drive as instructed, Mavericks created a 200 MP partition and Windows 8 created a 350 MB partition apart...

Rehabman, all my monitors are VGA only, can I use active DVI-D to VGA adapter or something like a HDMI to VGA signal converter, let me know plz, ty

sorry, I meant IGPEnabler=Yes, typo, VT-d is set to off, no dart=0, using chimera latest, IGPU memory is set to 64mb in BIOS, using DVI to VGA adapter, with no IGPlatformID only IGPEnabler=yes and it's getting stuck at same place, with -v it rolls so fast couldnt capture everything, here is the...

Rehabman, I just tried all the boot blags with IGPEnabler-Yes & IGPlatformID=then the flags it gets stuck at AGPM Controller-unknown platform, I am attaching a picture for reference, the only two IGPlatformID will let me get to the login screen is 04120006 & 04128086, not sure what am I doing...

changed it to 04128086, same problem, will show no kext loaded, no QE/CI

RehabMan, Here is the details of my org.chameleon.Boot.plist, IOReg attached, also when I use -f it gets stuck at BluetoothHCIController-completed. Thanks again for all your help. <key>EthernetBuiltIn</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string>...

RehabMan, Thanks for answring, I have tried all these flags, some of these will get the card recognized as HD4600 but graphics ram amount change on BIOS has no effect, stays at 64 MB and shows no kext loaded, no QE/CI, translucent menu bar is not there, I dont see that as an option under system...

Rehabman, I am using chimera latest, I put GraphicsEnabler=Yes & IGPEnabler =Yes on org.chameleon.Boot.plist, then at the time of booting with -v I tried different values of IntelAzulFB, under system information, extension I see that AppleIntelFramebufferAzul and AppleIntelHD5000Graphics kext is...

Hey Bud, I have the same problem, tried all possible solutions, IGPlatformID (ALL), Intel AzulFB=1 to 15 and it still show no kext loaded but recognises the card, is there any way you can upload the azulfb kext somewhere, ty