Mountain Lion: MultiBeast - No Audio/Solutions and Problem Reporting

[realdaveosx]

Hi Thanks for this resource

1. No audio out No mic in
2. GA-Z77-DS3H/I7-3770K/10.8.5/Intel HD4000,Nvidia GT630,Nvidia Quadro FX 1700, Boots HD4000 first
3. Kext This Guide HDAenbler1 and AppleHDA 2.4.7
4. NO DSDT kernelcahce=on Realtek 81xx and Altheros NIC kexts NVIDIA WEB DRiver HD4000 driver from multi beast.
It is a 887 and it was working fine in 10.7.5 before clean install and latest updates from Apple of 10.8.5 using Multibeast 5.5.5 for ML.
The last image shows the codec loading on 1B,2 with no 1B,0 this was the only thing I saw that was different.
Not Certain of where the registry load order comes from I am guessing that the issue maybe with the lack of a 1B,0 interface.
perhaps a flush or reorder to place it before the INtel HD4000 guessing because all three cards have non functioning HDMI outputs. Do not need them I have no HDMI to analog breakout device, Four other workstations feed into a mixing board along with this one. AppleTV audio out is working as well as the Airport express. Apple TV video is working on the Cinema 30 as mirror.

ANy help in the correct direction is welcome.

 

[toleda]

1. No audio out No mic in

IOReg says audio is configured properly and working. See Post #1, No Sound - Realtek ALC AppleHDA

 

[realdaveosx]

IOReg says audio is configured properly and working. See Post #1, No Sound - Realtek ALC AppleHDA

SO what am I missing ?

I followed the steps but do not see the answer you are referring to.

THe audio is showing in the Sound control panel as stated but no audio or mic in the real world.
I see the codec loaded at 1B,2 rather than at 1B,0 as your guide provides.