Contribute
Register

samsung np370r5e-s06

Status
Not open for further replies.
uniday said:
Ok ... Make all step by step...
Compile without errors
Place DSDT in EFI/CLOVER/ACPI/patched
Install kekst...

Result is the same... only 2 positions
minimum and "other"

Maby I should return my old DSDT ?
Click to expand...

Download patchmatic: https://github.com/RehabMan/OS-X-MaciASL-patchmatic.
Extract the 'patchmatic' binary from the ZIP. Copy it to /usr/bin, such that you have the binary at /usr/bin/patchmatic.

In terminal,
Code: 
rm -Rf ~/Downloads/RehabMan
mkdir ~/Downloads/RehabMan
cd ~/Downloads/RehabMan
patchmatic -extract

Post contents of Downloads/RehabMan directory (as ZIP).

Also, post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.
 
RehabMan said:
Looks normal/correct.

Make sure your DSDT is patched from the current native DSDT (eg. re-extract/re-patch).

Also, sometimes the discrete card in a dual-GPU system needs to be disabled for backlight control with this method to work...
Click to expand...


Done re-extract/re-patch.
All works perfectly except Brightness ...

Also found out when pressing FN+F1 (reduce brightness) apper sun as usual but do not reducing brightness and sun never appear again until reboot.

View attachment 117629

Found out this guide http://www.insanelymac.com/forum/to...ss-for-intel-80860046-1st-gen-hd-gma-5700mhd/
I think it can be helpful ...


Still dancing :beachball:

Trying again...
Now have message when trying to install RehabMan-Backlight-2013-1227 kekst ...

"System extension cannot be used
The system extension “//System/Library/Extensions/ACPIBacklight.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

"

What can it be ?
 
uniday said:
Done re-extract/re-patch.
All works perfectly except Brightness ...
Click to expand...

Disable your discrete card (either via BIOS or DSDT/SSDT patches).

If you use BIOS to disable it, don't forget to re-patch DSDT/SSDT...

Also found out when pressing FN+F1 (reduce brightness) apper sun as usual but do not reducing brightness and sun never appear again until reboot.
Click to expand...

Your keys are probably "breakless"... the key sends a make code, but contrary to spec, does not send a break code. Look at the Info.plist in VoodooPS2Keyboard.kext and you'll see several examples of "Breakless PS2" configuration. Use the debug version to determine the scan codes that correspond to your breakless keys.

View attachment 117629

Found out this guide http://www.insanelymac.com/forum/to...ss-for-intel-80860046-1st-gen-hd-gma-5700mhd/
I think it can be helpful ...
Click to expand...

Old information. Already implemented in my brightness patches.

Trying again...
Now have message when trying to install RehabMan-Backlight-2013-1227 kekst ...

"System extension cannot be used
The system extension “//System/Library/Extensions/ACPIBacklight.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

"

What can it be ?
Click to expand...

Install kexts with Kext Wizard.
 
RehabMan said:
Disable your discrete card (either via BIOS or DSDT/SSDT patches).

If you use BIOS to disable it, don't forget to re-patch DSDT/SSDT...
Click to expand...

My BIOS allow me to change a few parameters as TIME ACHI HT and BOOT PRIORITY ))
Applied patch Disabled from _REG (DSDT)

Nothing changed.

RehabMan said:
Your keys are probably "breakless"... the key sends a make code, but contrary to spec, does not send a break code. Look at the Info.plist in VoodooPS2Keyboard.kext and you'll see several examples of "Breakless PS2" configuration. Use the debug version to determine the scan codes that correspond to your breakless keys.
Click to expand...

Please tell more detailed about it... What to look for and what to change.
Beforehand thanks )

RehabMan said:
Install kexts with Kext Wizard.
Click to expand...

Kext installed successfully ... Tnx!.
 
uniday said:
My BIOS allow me to change a few parameters as TIME ACHI HT and BOOT PRIORITY ))
Applied patch Disabled from _REG (DSDT)

Nothing changed.
Click to expand...

Download patchmatic: https://github.com/RehabMan/OS-X-MaciASL-patchmatic.
Extract the 'patchmatic' binary from the ZIP. Copy it to /usr/bin, such that you have the binary at /usr/bin/patchmatic.

In terminal,
Code: 
rm -Rf ~/Downloads/RehabMan
mkdir ~/Downloads/RehabMan
cd ~/Downloads/RehabMan
patchmatic -extract

Post contents of Downloads/RehabMan directory (as ZIP).

Also, post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Please tell more detailed about it... What to look for and what to change.
Beforehand thanks )
Click to expand...

Look for Breakless in the Info.plist. You'll find it is a list of scan codes that don't send break codes. You'll need to determine which scan codes on your computer don't send break codes. If you read the wiki article on custom keyboard mapping you can see how to use the debug version to determine the scan codes.
 
RehabMan said:
Download patchmatic: https://github.com/RehabMan/OS-X-MaciASL-patchmatic.
Extract the 'patchmatic' binary from the ZIP. Copy it to /usr/bin, such that you have the binary at /usr/bin/patchmatic.

In terminal,
Code: 
rm -Rf ~/Downloads/RehabMan
mkdir ~/Downloads/RehabMan
cd ~/Downloads/RehabMan
patchmatic -extract

Post contents of Downloads/RehabMan directory (as ZIP).

Also, post ioreg: [URL]http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html[/URL].  Please, use the IORegistryExplorer v2.1 attached to the post!  DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.
[/QUOTE]

[ATTACH]118015[/ATTACH]

[ATTACH]118016[/ATTACH]

[quote="RehabMan, post: 942250"]
Look for Breakless in the Info.plist.  You'll find it is a list of scan codes that don't send break codes.  You'll need to determine which scan codes on your computer don't send break codes.  If you read the wiki article on custom keyboard mapping you can see how to use the debug version to determine the scan codes.[/QUOTE]

I can not find any words "Breakless" in the Info.plist of the VoodooPS2Controller.kext
Click to expand...
 
uniday said:
View attachment 118015

View attachment 118016
Click to expand...

Your _REG method is not executing to the end due to PNOT accessing variables that don't exist (due to dropping OEM SSDTs that are CPU related). Apply "Fix PNOT/PPNT" from my patch repo.

I can not find any words "Breakless" in the Info.plist of the VoodooPS2Controller.kext
Click to expand...

It is in the keyboard driver, VoodooPS2Keyboard.kext (a PlugIn of VoodooPS2Controller.kext).
 
RehabMan said:
Your _REG method is not executing to the end due to PNOT accessing variables that don't exist (due to dropping OEM SSDTs that are CPU related). Apply "Fix PNOT/PPNT" from my patch repo.
Click to expand...

Done.
OS X started with black screen. (Brightness was on minmum level)
Using flashlight made login and increase brightness :)

But brightness control is not working... The same minimum level and "other"

include new files ioreg and patchmatic

View attachment 118059

View attachment 118058
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top