Contribute
Register

NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01) with 'Maxwell' GeForce GTX 970 an

Status
Not open for further replies.
NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01f01) with 'Maxwell' GeForce GTX 970 and 980 Support

wolniaczy said:
phillymavs32 i had the same problem as you, all works smooth in verbose mode, i've added "verbose mode" in multibeast (customize->boot options) and its booting now without white screen and after all works perfect (even with the newest nvidia web driver 01f03)

in boot playlist looks like this: <string>kext-dev-mode=1 -v nvda_drv=1</string>

BTW... is it ok guys, to boot in this verbose mode?


EDIT: after a while i've started to recieve an error "A graphics problem has been detected." and immediately log out...

i've used this method for that: https://discussions.apple.com/thread/6596475?start=0&tstart=0 so far works, even benchmarking (before, when gtx90 started to work "harder" that error appears)
Click to expand...

I can't get it to boot anymore.. I can only get it to go with safemode without the card. So i'm just going to start over.. If it is an HDMI problem, does anyone think a DP -> HDMI cable would work because of the fact i have only HDMI ports on my display?
 
NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01f01) with 'Maxwell' GeForce GTX 970 and 980 Support

in my case HDMI doesn't work at all, only DVI, tomorrow i will test mini display->DVI/HDMI
 
NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01f01) with 'Maxwell' GeForce GTX 970 and 980 Support

DP to HDMI cable or adapter should be working fine.
No one know a way to enable HDMI port in Yosemite on all Maxwell nVidia cards
 
NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01f01) with 'Maxwell' GeForce GTX 970 and 980 Support

This is very strange. I have on my Gigabyte GTX 970 G1 Gaming, 3 monitors connected. 2 on the DVI connectors and the last one on the HDMI port and all 3 is working great. f03 of the Nvidia driver. I installed Yosemite from scratch and had a bit of problems getting the gfx card to work, suddenly I found the correct settings and all was working smooth as butter. Very very pleased with the system now. Everything is working, sound, network.

Gigabyte GA-Z77X-UP5 TH main board.

Here is my org.chameleon.Boot.plist.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>HDAEnabler</key>
<string>Yes</string>
<key>HDEFLayoutID</key>
<string>01000000</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>kext-dev-mode=1 nvda_drv=1</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>
Click to expand...
 
NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01f01) with 'Maxwell' GeForce GTX 970 and 980 Support

What's your SMBIOS? Also, your IGFX is enabled in the boot plist - any reasons why?
 
NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01f01) with 'Maxwell' GeForce GTX 970 and 980 Support

cccip said:
DP to HDMI cable or adapter should be working fine.
No one know a way to enable HDMI port in Yosemite on all Maxwell nVidia cards
Click to expand...

My HDMI port on my GTX 970 works - well, it works as HDMI 2.0 on Windows. But HDMI 2.0 (aka 4k@60Hz) is not working in OSX. :( It does work 4K@30Hz in OS X for sure...
 
NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01f01) with 'Maxwell' GeForce GTX 970 and 980 Support

Hey guys,

Anyone have any idea why my clover 10.10 is defaulting to OS X after every reboot? I can toggle Nvidia fine, and when it sleeps its ok, but on restart it defaults.

I am using nvda_drv=1 and i have tried both InjectNvidia and leaving it unchecked.

Thanks in advance
 
NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01f01) with 'Maxwell' GeForce GTX 970 and 980 Support

Totti said:
Hey guys,

Anyone have any idea why my clover 10.10 is defaulting to OS X after every reboot? I can toggle Nvidia fine, and when it sleeps its ok, but on restart it defaults.

I am using nvda_drv=1 and i have tried both InjectNvidia and leaving it unchecked.

Thanks in advance
Click to expand...

You mean you can't get the web driver choice to stick? I have the same problem. I chose it in the Nvidia panel, reboot, and ... OS X native driver is selected. Which isn't even supposed to support Maxwell... Go figure.
 
NVIDIA Releases Alternate Graphics Drivers for 10.10.0 (343.01.01f01) with 'Maxwell' GeForce GTX 970 and 980 Support

Here is my SMBIOS file

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMfamily</key>
<string>Mac Pro</string>
<key>SMproductname</key>
<string>MacPro3,1</string>
<key>SMboardproduct</key>
<string>Mac-F42C88C8</string>
<key>SMserial</key>
<string>G8814ZZ95J4</string>
<key>SMbiosversion</key>
<string>MultiBeast.tonymacx86.com</string>
</dict>
</plist>
Click to expand...

I had big problems even getting the card detected, I then pressed the button on the main board to switch to BIOS #2 and suddenly the card showed up! I could remove HDMI cable from internal port to port on the card and booted into Yosemite. I was very surprised and extremely happy !! :)

Will take some photos of bios settings and post...



EDIT: Here are the my BIOS settings.

IMG_0598.jpg

IMG_0599.jpg

IMG_0600.jpg

IMG_0602.jpg

IMG_0603.jpg

With these settings my HDMI port is working. And the 970 card is working perfect on 3 screens (2 DVI + 1 HDMI)
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top