Contribute
Register

Haswell HDMI Audio

Status
Not open for further replies.
Gigabyte GA-Z87X-UD7-TH/F4/ 4770k /760/ OS X 10.9.2

i followed this guide to set up everything http://www.tonymacx86.com/general-h...line-test-file-copy-results-3.html#post766043

i think all the audio is installed.

DSDT attached

I looked at IOJONES

PEGP@1 shows
GFX0@0 shows
HDAU@3 shows
underneath is AppleHDAController@3 and underneath that there is IOHDACodec@3,0 (maybe this is the issues)
IGPU@2 shows and it says connector type <00 08 00 00>

Also both devices say television yes (IGPU and GTX760)

Could somebody please help me out and let me know if its something wrong with the patches i installed from initial setup. I haven't yet to add a patch from this thread. Any assistance would be appreciated.

One last thing if its easy ill do it, I'm very knowledgable about computers, new to macs and hackingtosh. If it would be easier just to route audio out of line out jack on the motherboard and not have any headaches, Please let me know.
 
let me know if its something wrong with the patches
Other than the dsdt edits, important steps For HDMI audio are missing. See Post #1.
The GA-Z87X-UD7-TH has a PCIe bridge that disables HDMI audio. For additional dsdt edits, see Post #14 GA-Z87X-UD7 TH - HDMI Audio woes - Page 2.
Post #1, not done:
1. Notes/1. 8 series/AppleHDA.kext/Download patch/Double click to install
2. Notes/2. 8 series/AppleIntelFramebufferAzul.kext/Click on link/Select e patch//Download patch/Double click to install

Reply with edited dsdt and new IOReg.
 
Other than the dsdt edits, important steps For HDMI audio are missing. See Post #1.
The GA-Z87X-UD7-TH has a PCIe bridge that disables HDMI audio. For additional dsdt edits, see Post #14 GA-Z87X-UD7 TH - HDMI Audio woes - Page 2.
Post #1, not done:
1. Notes/1. 8 series/AppleHDA.kext/Download patch/Double click to install
2. Notes/2. 8 series/AppleIntelFramebufferAzul.kext/Click on link/Select e patch//Download patch/Double click to install

Reply with edited dsdt and new IOReg.

Thanks for the response. Do i do the edits inside of MaciASL?
 
Hello Toleda


I thinks that the option 8.2 "8 series HDMI Audio ssdt (with native dsdt)" in this guide is the better option, but like is usual I did something wrong because is not working


Checking the troubleshooting


1 - IORegisterExplorer 2.1 not can see the IGPU injection from the SSDT-1


2 - The IORegister can not see the HDAU@3. I guess that I should apply the patch from Notes 1 but, applying the patch, could break the onboard audio recently patched?, remember that for patch the onboard audio I used this guide http://github.com/toleda/audio_CloverALC


3 - The connector-type is the correct

Exist solution to my trouble or may I use another method?

Motherboard: Asus H81M-A
BIOS version: 1001 (last version)
Processor: i5 4440
Graphics: HD4600
OS: Maverick 10.9.2
DSDT: No
SSDT-1: Attached
IOJones or IOReg 2.1 file: Attached

I have a DSDT patched from pjaml for serie 8 motherboards but I am not using this actually aniway if you needs this attached

Greetings
 

Attachments

  • config.plist.zip
    1.7 KB · Views: 71
  • Macintosh.ioreg.zip
    388.5 KB · Views: 76
  • SSDT-1.aml.zip
    872 bytes · Views: 108
  • DSDT.aml.zip
    20.7 KB · Views: 56
Sorry, attached

Question. Is bad change the IGPU device at device PCI on the SSDT-1?, on PCI is where is the display

Greetings
 

Attachments

  • debug.log.zip
    5.9 KB · Views: 79
Question. Is bad change the IGPU device at device PCI on the SSDT-1?, on PCI is where is the display
I do not understand the question.
debug says SSDT-1 loaded but it did not. Edit config.plist/ACPI
Set DropOem to NO.
Add DropTables/TableID/SaSsdt (note there must be a space after the t)
Use toleda/audio_CloverHDMI/config-hdmi_hd4600-92.plist for exact settings.
 
Without luck Toleda, but with a doubt


In the file config-hdmi_hd4600-92.plist exists entries for apply patchs the kexts AppleHDAController and AppleIntelFramebufferAzul ... Should I add these entries too or just what you said?

debug.log and config.plist attached

Thanks
 

Attachments

  • config.plist.zip
    1.7 KB · Views: 99
  • debug.log.zip
    10.9 KB · Views: 66
In the file config-hdmi_hd4600-92.plist exists entries for apply patchs the kexts AppleHDAController and AppleIntelFramebufferAzul ... Should I add these entries too or just what you said?
When were you planning to do all the steps in the guide?
IOReg?
 
Sorry, was just asking

IOReg attached
 

Attachments

  • Macintosh.ioreg.zip
    399.2 KB · Views: 69
Status
Not open for further replies.
Back
Top