Contribute
Register

OS X 10.9.2 Update

Status
Not open for further replies.
Article: OS X 10.9.2 Update

bdg36 said:
Updated and..can't boot anymore..even with Unibeast I get the panic screen immediately... even in safe mode
System is Asus P8Z77-V, 3570k and ATI 7xxx
Click to expand...


UPDATE : it works now

First make sure you have nullcpupowermanagement or you may get the kernell panic like I did
I had to manually install it from my windows install.. then no more Kernell panic but still not boot
It was because of the Displayport connection..With DVI all is fine ...phew
 
Article: OS X 10.9.2 Update

Sorry, my Signature wasn't up to date...I'm using a 7750 HD Radeon Sapphire low profile... and I have tried every Framebuffer... none worked... It's either GE=no ---> Hangs on boot or GE=yes ---> no signal on DP port.
So I need to rollback but realized that I deleted the 10.9.1 install file a while back... :(
 
Mac Pro
GA-X58A-UD3R |  Xeon X5650 |  Radeon R9 290
Works perfectly with
ASUS P8H67-m EVO
Intel core I7 3770
Samsung 840 Pro 256Go

Just reinstalled all my multibeast, not just HDA & Trim...
Big Up @ll Tony's Community
 
Did the update on my system to and after the update a small problem. Ones in a while the system totally locks and it does not react on any input beside a reset. After a reset it runs with no problems. Looks like it only happens with a cold boot.

I7 3770
GB z77m-d3h
NV TI660
128gb evo ssd
 
Article: OS X 10.9.2 Update

fleisch said:
Sorry, my Signature wasn't up to date...I'm using a 7750 HD Radeon Sapphire low profile... and I have tried every Framebuffer... none worked... It's either GE=no ---> Hangs on boot or GE=yes ---> no signal on DP port.
So I need to rollback but realized that I deleted the 10.9.1 install file a while back... :(
Click to expand...

You still need to specify your FB using AtiConfig= as GE=Yes/No is not enough.
 
Build 1
Maximus VI Gene |  i7 4770K |  Radeon HD 7950
Article: OS X 10.9.2 Update

justr said:
Yes, I'm using GraphicsEnabler=Yes and AtiConfig=Vervet

In About This Mac I now have: ATI Radeon HD 5700 Series 1024 MB

This is the card I'm using with an Apple Cinema Display 27" LED: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150501
Click to expand...

If its only showing as 5700 then its not the right framebuffer. My 5770/5870 and 7950 all showed as the correct names. Its been a while since i used my 5770 so I can't recall exact FB I used but for my 5870 it was Langur.
 
Build 1
Maximus VI Gene |  i7 4770K |  Radeon HD 7950
Article: OS X 10.9.2 Update

Ok after stripping it all back I have narrowed things down to a problem with USB3

Everything runs fine until you try and run anything through a usb3 port

Then the system freezes shortly after plugin into a usb3 port does it on both
usb2 and usb3 devices arggh!

Is any one having issues with usb 3 on the Gigabyte Z87M-D3H boards?
 
Article: OS X 10.9.2 Update

After Update 10.9.2:
I can't sign in to AppStore, Facetime, IMessage and ICloud any longer.
I know the reason for that:
My onboard Network adapter en0 "Broadcom BCM57781" stopped working. (ASRock Z68 Extreme4)

Is there anybody, who has a working BMC57781 Kext for OSX 10.9.2 ?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top