Nvidia GTX 770 Not working
How I resolved issues when installing ML on 775 Gygabyte Board (Nvidia GTX 770)
Such as:
• Installation stopes @: [PCI configuration begin], then in no time, display looses signal
• Installation stopes @: IO8021Controller: : dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
19.661239: ATHR: unknown locale: 21
What you need:
Unibeast ML USB
USB formatted as Mac OS X Extended (journaled):
• Combo update 10.8.4
• Kext Utility
• MultiBeast 5.4.0
• org.chameleon.Boot.plist (edit it before Installing 10.8.4, otherwise you wont be able to edit it after updating)—check attchment
1. Bios Settings (Not disregarding the normal Hackintos Bios Setting)
• Advanced Chipset Features:
Onboard VGA = Always Enable
Init Display First = Onboard
Pres F10 & Save settings….
(Remove VGA cord from GTX 770 & insert it into Onboard VGA Motherboard)
2. Monitor is connected into Motherboard (GTX 770 is being disabled via Bios setting and NOT completely removed)
• Boot into Unibeast with F12….enter the ff Flags:
–v –x GE=NO npci=0x3000 PCIRoot=0,1,2,3,4,5
• Install ML
3. Install Combo Updates 10.8.4
• Boot into Unibeast with F12….SELECT ML HD DRIVE then enter the ff Flags:
–v –x GE=NO npci=0x3000 PCIRoot=0,1,2,3,4,5
• Install Combo Updates 10.8.4
• Place your working DSDT.aml on desktop.
• MultiBeast 5.4.0
➢ UserDSDT
➢ NVIDIA Retail 304.00.00f20 OpenCL Patch
• Run Kext Utility
• Replace org.chameleon.Boot.plist
4. Boot into ML HD DRIVE
• CHECK …if GTX 770 appears correctly….
5. Bios Settings
• Advanced Chipset Features:
Onboard VGA = [Enable If No Ext PEG]
Init Display First = [PEG]
Pres F10 & Save settings….
(Remove Onboard VGA cord from Motherboard & INSERT IT INTO GTX 770)
Everything is working fine…….
Thanks a lot:
stehor; xtrasteven; tonymacx86;
Thanks once more stehor with your magical Flags….