Contribute
Register

Battery Manager with Fix for Boot without Batteries

Status
Not open for further replies.
goksi75 said:
+-o AppleSmartBattery <class AppleSmartBattery, id 0x1000001f0, registered, ma$
{
"AvgTimeToFull" = 65535
"Amperage" = 18446744073709549996
"CurrentCapacity" = 2395
"MaxCapacity" = 4146
"IOGeneralInterest" = "IOCommand is not serializable"
"DesignCapacity" = 4146
"AvgTimeToEmpty" = 88
"InstantTimeToEmpty" = 93
"BatteryInvalidWakeSeconds" = 30
"Manufacturer" = "Hewlett-Packard"
"AtWarnLevel" = No
"AtCriticalLevel" = No
"ExternalChargeCapable" = No
"AdapterInfo" = 0
"Location" = 0
"PostChargeWaitSeconds" = 120
"IsCharging" = No
"InstantAmperage" = 18446744073709550078
"PostDischargeWaitSeconds" = 120
"BatteryInstalled" = Yes
"Voltage" = 10906
"CycleCount" = 28
"BatterySerialNumber" = "01791 2011/09/16"
"FullyCharged" = No
"Quick Poll" = No
"LegacyBatteryInfo" = {"Amperage"=18446744073709549996,"Flags"=4,"Capacit$
"Serial" = "01791 2011/09/16"
"ExternalConnected" = No
"DeviceName" = "Primary"
"TimeRemaining" = 88
}
Click to expand...

Was that ioreg output captured when the AC adapter was plugged in? It looks like a discharge state... running on battery, no AC adapter connected.
 
Yes running on battery no AC adapter connected.
 
goksi75 said:
RehabMan this is my screen shot after wake up,AC Charger is turn off I try everything but no lucky.
Click to expand...

I was more interested in the ioreg at this point above. Unless I misunderstand what you are saying there. Did you have the AC adapter plugged in here or not? If not, then what's the issue?
 
I'm using those right now.
If i see something wrong i tell you.

Nico
 
RehabMan said:
If what you are saying is that you have percentage showing at 98% on the menu bar, but the system saying "Not charging", that can happen if you just allow the battery to discharge to only 98%. The battery sub-system will not charge at that point just for the 2% extra capacity to help the battery have a longer total lifetime (lessen small discharge/recharge cycles). If you let it run down further, say to 80%, then plug in the power adapter, it will then begin to charge again.

If what you are saying is that you have percentage showing at 98% on the menu bar, but the system saying "Battery is Charged", that can happen if you battery is slightly degraded. That is where the battery can no longer sustain a 100% charge. You can find out about your specific battery health in About This Mac, More Info, System Report, and even more information by running the following in Terminal:
Code: 
ioreg -n AppleSmartBattery -r AppleSmartBattery

If you see your battery never reach 100% charge, I think it is possible you have MaxCapacity less than DesignCapacity. At least this is what I understand so far.
Click to expand...
Sorry Late my kid daughter and my boss was keeping me bz

ioreg -n AppleSmartBattery -r AppleSmartBattery

Code: 
+-o AppleSmartBattery  <class AppleSmartBattery, id 0x1000001e6, registered, matched, active, busy 0 (0 ms), retain 6>
    {
      "AvgTimeToFull" = 0
      "Amperage" = 0
      "CurrentCapacity" = 4257
      "MaxCapacity" = 4318
      "IOGeneralInterest" = "IOCommand is not serializable"
      "DesignCapacity" = 4318
      "AvgTimeToEmpty" = 0
      "InstantTimeToEmpty" = 0
      "BatteryInvalidWakeSeconds" = 30
      "Manufacturer" = "Hewlett-Packard"
      "AtWarnLevel" = No
      "AtCriticalLevel" = No
      "ExternalChargeCapable" = Yes
      "AdapterInfo" = 0
      "Location" = 0
      "PostChargeWaitSeconds" = 120
      "IsCharging" = No
      "InstantAmperage" = 0
      "PostDischargeWaitSeconds" = 120
      "BatteryInstalled" = Yes
      "Voltage" = 12466
      "CycleCount" = 0
      "BatterySerialNumber" = "00925 2012/03/21"
      "FullyCharged" = Yes
      "Quick Poll" = No
      "LegacyBatteryInfo" = {"Amperage"=0,"Flags"=5,"Capacity"=4318,"Current"=4257,"Voltage"=12466,"Cycle Count"=0}
      "Serial" = "00925 2012/03/21"
      "ExternalConnected" = Yes
      "DeviceName" = "Primary"
      "TimeRemaining" = 0
    }

kernel log

Code: 
PMAP: PCID enabled
PMAP: Supervisor Mode Execute Protection enabled
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
vm_page_bootstrap: 2002682 free pages and 78086 wired pages
kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
zone leak detection enabled
standard timeslicing quantum is 10000 us
standard background quantum is 2500 us
mig_table_max_displ = 74
TSC Deadline Timer supported and enabled
Refusing new kext com.jmicron.JMicronATA, v1.0.2: already have prelinked v1.1.6.
corecrypto kext started!
Running kernel space in FIPS MODE
Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
corecrypto.kext FIPS integrity POST test passed!
corecrypto.kext FIPS AES CBC POST test passed!
corecrypto.kext FIPS TDES CBC POST test passed!
corecrypto.kext FIPS AES ECB AESNI POST test passed!
corecrypto.kext FIPS AES XTS AESNI POST test passed!
corecrypto.kext FIPS SHA POST test passed!
corecrypto.kext FIPS HMAC POST test passed!
corecrypto.kext FIPS ECDSA POST test passed!
corecrypto.kext FIPS DRBG POST test passed!
corecrypto.kext FIPS POST passed!
NullCPUPowerManagement::init: properties=0xffffff8010cd0240
IntelCPUMonitor: Based on code by mercurysquad, --NON-TMX-- (C)2008
User defined TjMax=0
NullCPUPowerManagement::start
AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=0 Disabled
AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5] (S3)
RTC: Only single RAM bank (128 bytes)
AppleSmartBatteryManager Loading...
AppleSmartBattery loading...
IntelCPUMonitor: CPU family 0x6, model 0x3a, stepping 0x9, cores 2, threads 4
IntelCPUMonitor: Using efi
IntelCPUMonitor: BusClock=99MHz FSB=399MHz
IntelCPUMonitor: Platform string k62
IntelCPUMonitor: CPU0 Tjmax 105
IntelCPUMonitor: CPU1 Tjmax 105
mbinit: done [96 MB total pool size, (64/32) split]
Pthread support ABORTS when sync kernel primitives misused
PFM64 (36 cpu) 0xf10000000, 0xf0000000
[ PCI configuration begin ]
console relocated to 0xf10000000
PCI configuration changed (bridge=2 device=6 cardbus=0)
[ PCI configuration end, bridges 5 devices 15 ]
PXHCD    0xffffff80ef307000:UIMInitialize xHC addressing capability 64 bit register
PXHCD    0xffffff80ef307000:UIMInitialize HCSParams2 = 0x84000054 
PXHCD    0xffffff80ef307000:UIMInitialize MAX SCRATCH PAD = 16 
rooting via boot-uuid from /chosen: EA7FCDEE-9D2C-3036-ACC1-212F24FEBFBC
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchSeriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/Hitachi HTS547564A9E384 Media/IOGUIDPartitionScheme/Mountain Lion@2
BSD root: disk0s2, major 1, minor 2
Kernel is LP64
Waiting for DSMOS...
macx_swapon SUCCESS
Controller: Intel (Unknown) (vendor ID: 8086, device ID: 1e20)
Previous Shutdown Cause: 3
[AppleBluetoothHCIControllerUSBTransport][start] -- completed
DSMOS has arrived
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification 
[IOBluetoothHCIController][start] -- completed
VoodooPS2SynapticsTouchPad loaded
No interval found for . Using 8000000
VoodooPS2Trackpad: Synaptics TouchPad v7.5
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a
  -- power management may be incomplete or unsupported
AppleRTL8169Ethernet: Ethernet address b4:b5:2f:71:da:c1
3862 m2db8808a:99
Sandbox: sandboxd(200) deny mach-lookup com.apple.coresymbolicationd
**** [AppleBluetoothHCIControllerUSBTransport][configurePM] -- ERROR -- waited 30 seconds and still did not get the commandWakeup() notification -- this = 0xffffff8011f44c00 ****
[IOBluetoothHCIController::setConfigState] calling registerService
Sandbox: sandboxd(212) deny mach-lookup com.apple.coresymbolicationd
No interval found for . Using 8000000
Sandbox: sandboxd(231) deny mach-lookup com.apple.coresymbolicationd
Sandbox: sandboxd(236) deny mach-lookup com.apple.coresymbolicationd

BDMESG

Code: 
Chimera 1.11.1 (svn-r1394) [2012-08-08 21:15:51]
CPU: Brand String:                Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
CPU: Vendor:                      0x756e6547
CPU: Family / ExtFamily:          0x6 / 0x0
CPU: Model / ExtModel / Stepping: 0x3a / 0x3 / 0x9
CPU: Number of Cores / Threads:   2 / 4
CPU: Features:                    0x000002ff
CPU: TSC Frequency:               2494 MHz
CPU: FSB Frequency:               99 MHz
CPU: CPU Frequency:               2494 MHz
CPU: Minimum Bus Ratio:           12
CPU: Maximum Bus Ratio:           25
CPU: Current Bus Ratio:           25
Attempting to read GPT
Read GPT
Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B
Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC
Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 1103 bytes.
Invalid mach magic 0x2
Module 'Symbols.dylib' by 'Chameleon' Loaded.
	Description: Chameleon symbols for linking
	Version: 0
	Compat:  0
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/theme.plist] 2794 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/background.png] 2938 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/logo.png] 3016 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_generic.png] 16789 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus.png] 16789 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_ext3.png] 16789 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_fat16.png] 24504 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_fat32.png] 16789 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_ntfs.png] 16789 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_cdrom.png] 24504 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_selection.png] 6075 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_scroll_prev.png] 2816 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_scroll_next.png] 2813 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_boot.png] 621 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_verbose.png] 2817 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_ignore_caches.png] 2817 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_single_user.png] 2817 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_memory_info.png] 621 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_video_info.png] 621 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_help.png] 621 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_verbose_disabled.png] 2817 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_ignore_caches_disabled.png] 2817 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_single_user_disabled.png] 2817 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_selection.png] 3220 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/progress_bar.png] 2806 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/progress_bar_background.png] 2801 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/text_scroll_prev.png] 2935 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/text_scroll_next.png] 2940 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/font_console.png] 13715 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/font_small.png] 8303 bytes.
Read HFS+ file: [hd(0,2)/Library/Preferences/SystemConfiguration/com.apple.Boot.plist] 232 bytes.
Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 1103 bytes.
Read HFS+ file: [hd(0,2)/System/Library/CoreServices/SystemVersion.plist] 478 bytes.
Read HFS+ file: [hd(0,2)/private/var/vm/sleepimage] 512 bytes.
header read size 200
Incorrect image signature
Loading Darwin 10.8
Loading kernel cache /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 4096 bytes.
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 11631342 bytes.
ACPI table not found: DSDT.aml
No DSDT found, using 0 as uid value.
Using PCI-Root-UID value: 0
LAN Controller [10ec:8168] :: PciRoot(0x0)/Pci(0x1c,0x5)/Pci(0x0,0x0)
Setting up lan keys
Read HFS+ file: [hd(0,2)/Extra/smbios.plist] 699 bytes.
SMBus CmdReg: 0x1
Scanning SMBus [8086:1e22], mmio: 0x4, ioport: 0xef80, hostc: 0x1
SPD[0] (size): 146 @0x50
Slot: 0 Type 24 4096MB (DDR3 SDRAM) 1333MHz Vendor=TwinMOS
      PartNo=9DPTBNIB-TATP SerialNo=00000000
SPD[0] (size): 255 @0x51
SPD[0] (size): 146 @0x52
Slot: 2 Type 24 4096MB (DDR3 SDRAM) 1333MHz Vendor=A-DATA Technology
      PartNo=AD73I1C1674EV SerialNo=05F80300
SPD[0] (size): 255 @0x53
SPD[0] (size): 255 @0x54
SPD[0] (size): 255 @0x55
SPD[0] (size): 255 @0x56
SPD[0] (size): 255 @0x57

Type: 0, Length: 24, Handle: 0xc
BIOSInformation:
	vendor: Apple Inc.
	version: MBP91.88Z.00D3.B00.1203211536
	releaseDate: 21/03/12

Type: 1, Length: 27, Handle: 0xd
SystemInformation:
	manufacturer: Apple Inc.
	productName: MacBookPro9,2
	version: 1.0
	serialNumber: C02J2527DTY3
	uuid: C9BC39CB-C3BB-E111-945B-4AC45900006B
	wakeupReason: 0x6
	skuNumber: B4V21PA#UUF
	family: MacBook Pro

Type: 2, Length: 16, Handle: 0xe
BaseBoard:
	manufacturer: Apple Inc.
	product: Mac-6F01561E16C75D06
	version: KBC Version 58.1A
	serialNumber: PCWBB1A2D2T2NI
	assetTagNumber: uó¶
	locationInChassis: uó¶
	boardType: 0x1

Type: 3, Length: 17, Handle: 0xf
SystemEnclosure:
	manufacturer: Hewlett-Packard
	type: 10
	version: uó¶
	serialNumber: 2CE2252DT4
	assetTagNumber:  

Type: 4, Length: 42, Handle: 0x0
ProcessorInformation:
	socketDesignation: U3E1
	processorType: 3
	processorFamily: 0xCD
	manufacturer: Intel(R) Corporation
	processorID: 0x306A9
	processorVersion: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
	externalClock: 99MHz
	maximumClock: 2494MHz
	currentClock: 2500MHz
	serialNumber: To Be Filled By O.E.M.
	assetTag: To Be Filled By O.E.M.
	partNumber: uó¶

Type: 7, Length: 19, Handle: 0x1
Type: 7, Length: 19, Handle: 0x4
Type: 7, Length: 19, Handle: 0x3
Type: 7, Length: 19, Handle: 0x2
Type: 8, Length: 9, Handle: 0x14
Type: 8, Length: 9, Handle: 0x19
Type: 8, Length: 9, Handle: 0x18
Type: 8, Length: 9, Handle: 0x17
Type: 8, Length: 9, Handle: 0x16
Type: 8, Length: 9, Handle: 0x15
Type: 9, Length: 13, Handle: 0x1b
Type: 10, Length: 6, Handle: 0x11
Type: 11, Length: 5, Handle: 0x1a
Type: 13, Length: 22, Handle: 0x1e
Type: 16, Length: 23, Handle: 0x5
Type: 17, Length: 34, Handle: 0x6
MemoryDevice:
	deviceLocator: Bottom-Slot 1(top)
	bankLocator: BANK 0
	memoryType: DDR3
	memorySpeed: 1333MHz
	manufacturer: TwinMOS
	serialNumber: 00000000
	assetTag: 9876543210
	partNumber: 9DPTBNIB-TATP

Type: 17, Length: 34, Handle: 0x8
MemoryDevice:
	deviceLocator: Bottom-Slot 2(under)
	bankLocator: BANK 2
	memoryType: DDR3
	memorySpeed: 1333MHz
	manufacturer: A-DATA Technology
	serialNumber: 05F80300
	assetTag: 9876543210
	partNumber: AD73I1C1674EV

Type: 19, Length: 31, Handle: 0xa
Type: 20, Length: 35, Handle: 0x7
Type: 20, Length: 35, Handle: 0x9
Type: 22, Length: 26, Handle: 0x1c
Type: 32, Length: 20, Handle: 0x10
Type: 41, Length: 11, Handle: 0x12
Type: 41, Length: 11, Handle: 0x13
Type: 137, Length: 12, Handle: 0x1d
Type: 131, Length: 6, Handle: 0x1e
AppleProcessorType:
	ProcessorType: 0x601

Type: 132, Length: 6, Handle: 0x1f
AppleProcessorBusSpeed:
	ProcessorBusSpeed (QPI): 0.1GT/s

Type: 127, Length: 4, Handle: 0x20

Customizing SystemID with : c9bc39cb-c3bb-e111-945b-4ac45900006b
ACPI table not found: DSDT.aml
ACPI table not found: SSDT.aml
FADT: Restart Fix applied!
Found ACPI CPU: CPU0
Found ACPI CPU: CPU1
Found ACPI CPU: CPU2
Found ACPI CPU: CPU3
Found ACPI CPU: CPU4
Found ACPI CPU: CPU5
Found ACPI CPU: CPU6
Found ACPI CPU: CPU7
SSDT with CPU C-States generated successfully
P-States: min 12, max 25
Number of P-States Generated: 14
SSDT with CPU P-States generated successfully
RSDT: Added 2 SSDT table(s)
FADT: Restart Fix applied!
Added 2 SSDT table(s) into XSDT
Starting Darwin x86_64
Boot Args: boot-uuid=EA7FCDEE-9D2C-3036-ACC1-212F24FEBFBC rd=*uuid 
EHCI controller [8086:1e2d] at 00:1a.0 DMA @d0919000
Setting Legacy USB Off on controller [8086:1e2d] at 00:1a.0
Legacy USB Off Done
EHCI controller [8086:1e26] at 00:1d.0 DMA @d0918000
Setting Legacy USB Off on controller [8086:1e26] at 00:1d.0
Legacy USB Off Done
 

Attachments

  • DSDT.zip
    52.1 KB · Views: 152
corebuilder said:
Sorry Late my kid daughter and my boss was keeping me bz

ioreg -n AppleSmartBattery -r AppleSmartBattery

Code: 
+-o AppleSmartBattery  <class AppleSmartBattery, id 0x1000001e6, registered, matched, active, busy 0 (0 ms), retain 6>
    {
      "AvgTimeToFull" = 0
      "Amperage" = 0
      "CurrentCapacity" = 4257
      "MaxCapacity" = 4318
      "IOGeneralInterest" = "IOCommand is not serializable"
      "DesignCapacity" = 4318
      "AvgTimeToEmpty" = 0
      "InstantTimeToEmpty" = 0
      "BatteryInvalidWakeSeconds" = 30
      "Manufacturer" = "Hewlett-Packard"
      "AtWarnLevel" = No
      "AtCriticalLevel" = No
      "ExternalChargeCapable" = Yes
      "AdapterInfo" = 0
      "Location" = 0
      "PostChargeWaitSeconds" = 120
      "IsCharging" = No
      "InstantAmperage" = 0
      "PostDischargeWaitSeconds" = 120
      "BatteryInstalled" = Yes
      "Voltage" = 12466
      "CycleCount" = 0
      "BatterySerialNumber" = "00925 2012/03/21"
      "FullyCharged" = Yes
      "Quick Poll" = No
      "LegacyBatteryInfo" = {"Amperage"=0,"Flags"=5,"Capacity"=4318,"Current"=4257,"Voltage"=12466,"Cycle Count"=0}
      "Serial" = "00925 2012/03/21"
      "ExternalConnected" = Yes
      "DeviceName" = "Primary"
      "TimeRemaining" = 0
    }
Click to expand...

According to the battery ioreg info there, your battery is near full (4257 of 4318), so it won't charge. Perfectly normal. Let it discharge more, then plug it back in and see if it shows charging progress. I don't know the exact threshold, it is controlled by BIOS, but usually under 90% does the trick.

Also, your DSDT needs work. See the DSDT for 4340 I posted here: http://www.tonymacx86.com/hp-proboo...-fix-boot-without-batteries-3.html#post432347
 
RehabMan said:
According to the battery ioreg info there, your battery is near full (4257 of 4318), so it won't charge. Perfectly normal. Let it discharge more, then plug it back in and see if it shows charging progress. I don't know the exact threshold, it is controlled by BIOS, but usually under 90% does the trick.

Also, your DSDT needs work. See the DSDT for 4340 I posted here: http://www.tonymacx86.com/hp-proboo...-fix-boot-without-batteries-3.html#post432347
Click to expand...

DSDT for 4340 downloaded will test after dinner in 20 min or so :)

btw who need i5 smbios.plist & org.chameleon.Boot.plist for HP ProBook 4540s Intel Core i5 3 i5-3210M / 2.5 GHz
 

Attachments

  • smbios.plist
    699 bytes · Views: 482
  • org.chameleon.Boot.plist
    1.1 KB · Views: 338
RehabMan said:
Was that ioreg output captured when the AC adapter was plugged in? It looks like a discharge state... running on battery, no AC adapter connected.
Click to expand...

Yes my Ac adapter is not connected, and battery icon show Power Source: Power Adapter,and after Sleep and Wake Up I have this on my desktop
 

Attachments

  • Screen Shot 2012-08-27 at 10.10.34 PM.jpg
    Screen Shot 2012-08-27 at 10.10.34 PM.jpg
    192.2 KB · Views: 450
goksi75 said:
Yes my Ac adapter is not connected, and battery icon show Power Source: Power Adapter,and after Sleep and Wake Up I have this on my desktop
Click to expand...

So the issue you are reporting here is that when the laptop wakes up, even though the AC adapter is not connected, the power status shows Power Source: Power Adapter.

I tried the following and was not able to reproduce the problem:

- unplugged the AC adapter
- verified Power Source: Battery in menu bar
- put laptop to sleep with AppleMenu -> Sleep
- woke laptop up with power button
- verified Power Source: Battery in menu bar

If you are taking different steps to reproduce this problem, please let me know what they are. Thanks,
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top